Outcast Horizon Parts GP

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
Outcast01
[L] Plates
Posts: 16
Joined: Thu Jul 17, 2008 4:48 pm
Location: US

Outcast Horizon Parts GP

Post by Outcast01 »

Hey Guys. some of you may know know me from the StarquestClub site. Im running a GP of the radio kits and air diversion panels I make for the Starions. heres all the info for it:

Looking to see if people are interested in a GP for the Radio Kits and Air Diversion Pannels I make. Ive also been working on a double din kit and a radio deletion kit.

This is going to end on January 30, 2009

Image
Air Diversion Pannel
10 = $55.00
20 = $47.50
30 = $45.00

Image
Radio Kit; No Gauge Holes
10 = $28.50
20 = $21.00
30 = $18.50

Image
Radio Kit; 3 Gauge Holes (Bellow Radio)
10 = $29.50
20 = $22.00
30 = $19.50

Radio Kit; 3 Gauge Holes (Above Radio)
10 = $29.50
20 = $22.00
30 = $19.50

Radio Kit; Double Din
10 = $28.50
20 = $21.00
30 = $18.50

Powder Coating for Radio kits$5
Gloss Red
Gloss Orange
Gloss Yellow
Gloss Green
Gloss Blue
Gloss Black
Grey
Gunmetal (lots of different coloered metalics in this)
Screamin Eagle (textured Black, kinda Semi gloss, very nice finish)
Flat Black

Shipping is an extra $20 since Im in the states :( . There is also the option of having me powder coat the radio kits for an extra $5. The Double Din kit is just a trim peice. It is not ment to hold the radio. Most Double Din decks are bolted in which means you guys would have to drill your side brakets to mount the deck.

Im going to post this up on the other sites to try and get as many people going as posible to get everyone the best price.

Radio Kit; No Holes:
1. dmyers151 (SQC) PAID
2. Dart67 (SQC) PAID
3. lamlew (SQC)
4. dirty sanchez (AUS) PAID
5.
6.
7.
8.
9.
10.

Radio Kit; 3 holes Below Deck:
1. lepore (SQC)
2. mdbgracing + powder coating (SQC) PAID
3. Greg + powder coating (SQC)
4. helrar70 (SQC)
5. SpoolinTurbo (SQC)
6. CaliconquestAlex (SQC) PAID
7. newquest86 (SQC) PAID
8. jody1 + powder coating (SQC)
9. Jcizzle61 + Powder Coating (SQC) PAID
10. Slydogg (SQC) PAID

Radio Kit; 3 hole above deck:
1. PSU_Crash (SQC) PAID
2. Ono (SQC) PAID
3. Mix_67 (SQC)
4. slowspyder (SQC)
5. JD_Stazza_Brendan + Powder Coating (AUS) PAID
6. BMWTech + Powder Coating(SQC)PAID
7. BMWTech (SQC)PAID
8. toofast + Powder Coating (SQC)
9. dirty sanchez (AUS) + Powder Coating PAID
10. Hernz + Powder Coating (SQC) PAID
11. MC23 PAID

Not Sure:
87QuestKS (SQC)

Air Diversion Pannel:
1. CaliConquestAlex (SQC) PAID
2. Dstar88 (SQC)
3. Dart67 (SQC) PAID
4. JD_Stazza_Brendan (AUS) PAID
5. MR Bender(AUS)PAID
6. iGSR_VR (G54B)
7. iGSR_VR (G54B)
8. jody1 (SQC)
9. newquest86 (SQC) PAID
10. dmyers151 (SQC) PAID
11. BMWTech (SQC)PAID
12. dirty sanchez (AUS) PAID
13. slydogg (SQC) PAID

Radio Harness $10
1. lamlew (AUS)
2. spoolinturbo
3. jody1 (SQC)
4. psucrash (SQC) PAID
http://outcasthorizon.com/starquest/sqcgp.html
Last edited by Outcast01 on Tue Feb 24, 2009 7:31 am, edited 15 times in total.
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

Im interested in the Air Diversion panel and Radio Kit. Have you gotten any shipping quotes done to Australia? thats my main concern. Thanks.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
User avatar
MR Bender
Enthusiast king
Posts: 754
Joined: Sun Nov 11, 2007 8:01 pm
Location: Perth Western Australia (SOR)

Post by MR Bender »

Im interested in the Air Diversion panel too
Bite my shiny metal ass!!!

Russell Coight: Some of the animals are nocturnal, so the best time to see them is at night. Only you can't see them, because it's dark.
Outcast01
[L] Plates
Posts: 16
Joined: Thu Jul 17, 2008 4:48 pm
Location: US

Post by Outcast01 »

Shipping is an extra $20 (USC). can you please specify which radio kit you would like, I make four different ones :P
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

So the extra $20 shippin to Australia is for the whole package? Ie if i buy an air diversion plate and the radio blanking plate, its an extra $20 on the total? Or is it an extra $20 on each item?

Thanks
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

So I want an
Air diverson panel = $55 (at the moment)
Radio kit, 3 gauge above radio = $29.50 (at the moment)

It would be
55.00
+29.50
+20 shipping
=104.50 USD
Correct? if so put me down for those peices , thanks
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
Outcast01
[L] Plates
Posts: 16
Joined: Thu Jul 17, 2008 4:48 pm
Location: US

Post by Outcast01 »

I put all the goodies into on box so that the shipping is flat rate for all the stuff you get.

Im also going to extend this out till January 30.
User avatar
www.18u
almost postwhore
Posts: 1112
Joined: Tue May 18, 2004 12:31 am

Post by www.18u »

I would be interested in the diversion panel also. I think you might want to check that it will be allowed to be shipped due to its size first.

Good on you for offering us guys some parts :beer
Image
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

I'm up for a radio kit with no gauge holes.. I would be putting switches there..

what's the radio harness for $10?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Outcast01
[L] Plates
Posts: 16
Joined: Thu Jul 17, 2008 4:48 pm
Location: US

Post by Outcast01 »

thrash wrote:I'm up for a radio kit with no gauge holes.. I would be putting switches there..

what's the radio harness for $10?
If your factory radio plug hasnt been cut out it lets you install the new deck with out hacking the harness. some people like to keep the new aftermarket deck they put into cars and reinstall the factory if/when they sell the car so this gives you that option.
Outcast01
[L] Plates
Posts: 16
Joined: Thu Jul 17, 2008 4:48 pm
Location: US

Post by Outcast01 »

list updated.
Outcast01
[L] Plates
Posts: 16
Joined: Thu Jul 17, 2008 4:48 pm
Location: US

Post by Outcast01 »

Ok guys, link is up for the payments page. Let me know if there is anything else you need.

http://outcasthorizon.com/starquest/sqcgp.html
User avatar
MR Bender
Enthusiast king
Posts: 754
Joined: Sun Nov 11, 2007 8:01 pm
Location: Perth Western Australia (SOR)

Post by MR Bender »

um i dont have paypal can anyone help me pay for it
as in if you have paypal can i sent you the money by netbank and then you pay for the thing i want? any takers?? can anyone help me??
Bite my shiny metal ass!!!

Russell Coight: Some of the animals are nocturnal, so the best time to see them is at night. Only you can't see them, because it's dark.
Outcast01
[L] Plates
Posts: 16
Joined: Thu Jul 17, 2008 4:48 pm
Location: US

Post by Outcast01 »

if you have a credit card or a bank ATM card my paypal set up will let you pay with that. Just another option for you ;)
Outcast01
[L] Plates
Posts: 16
Joined: Thu Jul 17, 2008 4:48 pm
Location: US

Post by Outcast01 »

List has been updated. Im still waiting on a lot of people to pay.
Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests