Starion labelled JD factory floor mats and window guards
-
- I love starions
- Posts: 481
- Joined: Fri Mar 19, 2004 3:50 pm
- Location: Melbourne
Starion labelled JD factory floor mats and window guards
[FLOOR MATS PHOTOS NOW POSTED - ON SECOND PAGE]
Fund raising time for building my engine!
I have for sale for $200neg a full set of 5 JD Starion floor mats (2 front 3 rear because there is one special shaped one that goes over the trans tunnel). They are grey plush carpet and have Starion written on them in white, and are in fairly good condition other than a bit of basic wear and tear.
Also for $100neg are driver and passenger window slimline metal window wind deflectors / guards, also with Starion written on them, from my JD.
If anyone even might be slightly interested in either, let me know and I'll post photos, even if it's just for curiosity.
I'm located in Vic, but am happy to post, just ask and I'll find out postage costs.
Fund raising time for building my engine!
I have for sale for $200neg a full set of 5 JD Starion floor mats (2 front 3 rear because there is one special shaped one that goes over the trans tunnel). They are grey plush carpet and have Starion written on them in white, and are in fairly good condition other than a bit of basic wear and tear.
Also for $100neg are driver and passenger window slimline metal window wind deflectors / guards, also with Starion written on them, from my JD.
If anyone even might be slightly interested in either, let me know and I'll post photos, even if it's just for curiosity.
I'm located in Vic, but am happy to post, just ask and I'll find out postage costs.
Last edited by MitsuMadness on Wed Jan 14, 2009 8:58 am, edited 1 time in total.
<--== When I die, I want to be buried sideways ==-->
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
-
- I've been here before
- Posts: 201
- Joined: Sat Nov 20, 2004 7:04 pm
- Location: USA
- Contact:
-
- I love starions
- Posts: 481
- Joined: Fri Mar 19, 2004 3:50 pm
- Location: Melbourne
Hi! Sure thing, I'll take photos tonight and post them up.
Yeh my JD is a GSR-V with the DASH motor in it from factory, only imported from Japan about 3 years ago. So that's why it came with all the accessories, etc.
What parts are you still needing? I do have some spares.
Yeh my JD is a GSR-V with the DASH motor in it from factory, only imported from Japan about 3 years ago. So that's why it came with all the accessories, etc.
What parts are you still needing? I do have some spares.
<--== When I die, I want to be buried sideways ==-->
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
yeah hugh, stop calling your car a JD!!!!!!
LOL
LOL
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- I love starions
- Posts: 481
- Joined: Fri Mar 19, 2004 3:50 pm
- Location: Melbourne
Yep window guards are in good condition :)
Window guards now sold - to MrBishi!
Interesting comment about GSR-V / JD, err yeh, I'm gonna have a close look when I get home! But yeh it's definitely the GSR-V cos it has all the little GSR-V stickers and that stuff still factory, and has the 5 stud wheels, black plush interior, rear surround spoiler, so that's where I assume JD (but I seem to remember other stuff confirming JD too, but will check that out on the plate).
Was GSR-V a different designation to JD?
Window guards now sold - to MrBishi!
Interesting comment about GSR-V / JD, err yeh, I'm gonna have a close look when I get home! But yeh it's definitely the GSR-V cos it has all the little GSR-V stickers and that stuff still factory, and has the 5 stud wheels, black plush interior, rear surround spoiler, so that's where I assume JD (but I seem to remember other stuff confirming JD too, but will check that out on the plate).
Was GSR-V a different designation to JD?
<--== When I die, I want to be buried sideways ==-->
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
Dash motor and 5 stud are the main difference from GSR-V to JD.
JD only has the intercooled 8V motor and 4 Stud.
JD only has the intercooled 8V motor and 4 Stud.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-
- I love starions
- Posts: 481
- Joined: Fri Mar 19, 2004 3:50 pm
- Location: Melbourne
-
- I love starions
- Posts: 481
- Joined: Fri Mar 19, 2004 3:50 pm
- Location: Melbourne
Welllllllll kinda a few things at once really... want to set up a spare engine for the JB track car so I can drop it in and keep racing if something happens, and also am wanting to start fiddling with multipoint.
Then I am also thinking of pulling out the VR4 parts and sitting the starion block on my engine stand to tempt me to start assembling.
You doing your engine rebuild inspired me that I should get fiddling engine side as well as body side :)
Oh and I want to start saving for custom coilovers for the JB track car, cos the shocks are really shot in it.
So yeh, basically time to start raising some funds by selling everything I don't need including spare dirt bikes, and spare anything other than Starions :D
Then I am also thinking of pulling out the VR4 parts and sitting the starion block on my engine stand to tempt me to start assembling.
You doing your engine rebuild inspired me that I should get fiddling engine side as well as body side :)
Oh and I want to start saving for custom coilovers for the JB track car, cos the shocks are really shot in it.
So yeh, basically time to start raising some funds by selling everything I don't need including spare dirt bikes, and spare anything other than Starions :D
<--== When I die, I want to be buried sideways ==-->
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
-
- I love starions
- Posts: 481
- Joined: Fri Mar 19, 2004 3:50 pm
- Location: Melbourne
UPDATE:
So I have the floor mats out of the car now, and am getting them steam cleaned, then will photograph them for people to see! (Will look much nicer once they're clean) :)
So I have the floor mats out of the car now, and am getting them steam cleaned, then will photograph them for people to see! (Will look much nicer once they're clean) :)
<--== When I die, I want to be buried sideways ==-->
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
if the floor mats are better than the ones in my widey then i'll probably grab em off ya :beer
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Who is online
Users browsing this forum: No registered users and 18 guests