Technical questions and ideas regarding how your Starion looks inside and out, bodykits to stereos.
fr335tyl3r
I'm Sorta Reformed!
Posts: 2073 Joined: Tue Apr 13, 2004 3:07 amLocation: Baulkham Hills, NSW
Post
by fr335tyl3r Thu Apr 29, 2004 6:38 pm
Hey,
Cookiemonster
Mother Goose
Posts: 3177 Joined: Thu Jan 08, 2004 4:33 pmLocation: Sydney
Post
by Cookiemonster Thu Apr 29, 2004 7:54 pm
It screws off. Just making sure you know that.
hcca
Enthusiast king
Posts: 884 Joined: Thu Jan 08, 2004 9:24 pmLocation: Brisbane
Contact:
Post
by hcca Thu Apr 29, 2004 8:28 pm
Unless i'm mistaken, the boot comes off from the base of the console so you'll have to pull that out to remove the boot.
fr335tyl3r
I'm Sorta Reformed!
Posts: 2073 Joined: Tue Apr 13, 2004 3:07 amLocation: Baulkham Hills, NSW
Post
by fr335tyl3r Thu Apr 29, 2004 8:38 pm
Its all good now...i just needed to get the knob off...and i was able to slide the boot off as well
Alspos
Flucking kwankers
Posts: 4107 Joined: Thu Jan 08, 2004 2:09 pmLocation: Melbourne
Contact:
Post
by Alspos Fri Apr 30, 2004 3:27 pm
hcca wrote: Unless i'm mistaken, the boot comes off from the base of the console so you'll have to pull that out to remove the boot.
Guess you're mistaken.
You can get the boot off without removing the console.
If it's the standard knob it unscrews, if it's aftermarket look for grub screws or somebody has glued it on.
hcca
Enthusiast king
Posts: 884 Joined: Thu Jan 08, 2004 9:24 pmLocation: Brisbane
Contact:
Post
by hcca Fri Apr 30, 2004 3:29 pm
You can get the boot off without removing the console.
Well there you go.. shows you how much attention I pay to things considering within the last month I have pulled the console out of my car about 5 times :) I must be thinking of the Sigma.
ProZac
G33Kz0r
Posts: 2674 Joined: Thu Nov 27, 2003 1:26 pmLocation: Christchurch, New Zealand
Contact:
Post
by ProZac Fri Apr 30, 2004 5:32 pm
anyone care to specify HOW you get the shifter boot out without removing the console? do you push down on the base up un-clip it, then manouver it out?
fr335tyl3r
I'm Sorta Reformed!
Posts: 2073 Joined: Tue Apr 13, 2004 3:07 amLocation: Baulkham Hills, NSW
Post
by fr335tyl3r Fri Apr 30, 2004 6:09 pm
If it is the concertina style one...mine just slid off up the shaft, no clips involved.
Alspos
Flucking kwankers
Posts: 4107 Joined: Thu Jan 08, 2004 2:09 pmLocation: Melbourne
Contact:
Post
by Alspos Fri Apr 30, 2004 6:44 pm
Users browsing this forum: No registered users and 17 guests
