My other baby

Display your ride and post power figures, dyno runs, drag and circuit times.
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

My other baby

Post by Vulpes »

I know it's not a Staz but it will run and hide from a standard starion and it is in absolutly MINT condition. 83,000 k's and serviced every 5,000. Drives likes it's made out of tin cans though compared to the quality and weight of a starion.
Image
Image
Image
Image
Image
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

Very nice and immaculate! I had an '86 GSR Turbo Cordia as well - NZ-spec with crap seats but with TC06 turbo factory. I also had an '85 4WD Turbo Cordia GT with TC05.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Re: My other baby

Post by thrash »

Vulpes wrote:Drives likes it's made out of tin cans though compared to the quality and weight of a starion.
haha that would be why it can run and hide from a starion.. the cordias were ever so slightly quicker in stock form due to their light weight weren't they?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Re: My other baby

Post by OLD FART »

Vulpes wrote:I know it's not a Staz but it will run and hide from a standard starion and it is in absolutly MINT condition. 83,000 k's and serviced every 5,000. Drives likes it's made out of tin cans though compared to the quality and weight of a starion.


Geez Roger will have "a gun in his pocket " when he sees your pics LOL
In case you don't understand that is a quote from Mae West to an ardent suitor " is that a gun in your pocket or are you glad to see me ???"
Last edited by OLD FART on Fri Nov 21, 2008 7:31 pm, edited 1 time in total.
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

if you don't know what a "gun in his pocket" means you are either underage or severely deprived :shock:

oldie.. edit your post to take out the [img] tags at the end of the quote bit.. but don't take out the last [/quote]

this will remove the publicate pictures
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
TOMSUN
Group buy King
Posts: 2391
Joined: Fri Sep 10, 2004 10:24 am
Location: Sydney (Liverpool)

Post by TOMSUN »

dirtygalant wrote:Very nice and immaculate! I had an '86 GSR Turbo Cordia as well - NZ-spec with crap seats but with TC06 turbo factory. I also had an '85 4WD Turbo Cordia GT with TC05.
What??? A cordia 4WD??? Never heard of them...
Got pics?
1985 JB Starion #157
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

yeah well you aussies missed out a bit on the grey jap imports :P

I'll have to load up some pics of it when I get home. It was honestly nothing special, just a typical Jap spec Cordia with TC05, big bumpers etc, with primitive 4WD - the rear beam was torsion spring, the front steering crossmember was dropped down to allow the transfer case to go above the rack, and the whole cars suspension was raised up an inch or two. It really looked like a post-production afterthought implementation - the car simply wasn't designed to have a 4WD model like the 87-92 Galant did. The gearbox was a four speed 'super-shift' box with a transfer case hanging off it, there was no centre diff, and the 4WD was electronically engaged with a button on the top of the super-shift lever.

Found these pics on the internet

Image

Image

Image


Mine was white much like this one (this one is in Wellington, NZ somewhere):

Image

Image

Image

Mine was badged as a 'GT' as opposed to a GSR, and it had vinyl door cards, a plastic blanking plate in place of the clock above the glovebox, although it did have recaro-like seats and air conditioning. The chassis prefix was E-A213G. I just recently sold the speedometer cluster which had the 4WD selection indicator on it - one of the last parts I have left of it.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
User avatar
Lunacy
nearly postwhore
Posts: 1355
Joined: Fri Jul 22, 2005 3:31 pm
Location: Land of Confusion

Post by Lunacy »

Yeah there was a rusted out 4wd cordia at pick a part in auckland a couple of months back, still had the running gear in it but the body was way beyond saving.
Image
kiwieurospec
Enthusiast
Posts: 605
Joined: Thu Apr 06, 2006 2:21 pm
Location: Christchurch,New Zealand

Post by kiwieurospec »

^ Cheers DG, think I just found where the diff from my 4WS car is from.


We also still have a Cordia, 1985 1 owner NZ new, NZ built.
They fucked up building it as I found out when we fitted air con,
they had put the wiring loom thru the wrong holes in the firewall, the holes for the air con pipes :x
1985 Widebody Factory Four Wheel Steering
1986 Euro Spec-ABS,LSD etc
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

Oh real wonder if it's still there - 'tis a pretty rare (but shit) car. That guy in Wellington was having issues with his gearbox, seeing as a 4WD Cordia gearbox isn't the easiest thing to get ahold of, it affectively wrote off his car.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

Post by Vulpes »

Thats true thrash they are as light as ( light is if you are a kiwi ) In fact it's light weight is what makes it so much fun to drive. Although I prefer the look of the staz in all departments I must admit this thing is way more entertaining to drive. You feel everything.
User avatar
jwebb2876
I've been here before
Posts: 248
Joined: Wed Sep 03, 2008 10:53 am
Location: parkes

Re: My other baby

Post by jwebb2876 »

Vulpes wrote:I know it's not a Staz but it will run and hide from a standard starion and it is in absolutly MINT condition. 83,000 k's and serviced every 5,000. Drives likes it's made out of tin cans though compared to the quality and weight of a starion.
Image
Image
Image
Image
Image
Are those GK Sigma SE rims? Nice car by the way, had a rusty one as a paddock basher and it went like blazes til i rolled it. the engine now resides in my new paddock basher- a CB Lancer
"Speed isn't everything; you gotta look cool on the touge too."- Keiichi Tsuchiya
gj2600.wordpress.com
groupAralliart
BATHURST LEGEND 07
Posts: 948
Joined: Sun Feb 18, 2007 4:46 pm
Location: Brisbane

Post by groupAralliart »

They are the original rims - Mitsubishi shared many parts between models
User avatar
Vulpes
almost postwhore
Posts: 1281
Joined: Mon Oct 27, 2008 7:13 pm
Location: Sydney

Post by Vulpes »

Ralliart is correct of course, it is as original as ( sorry, its as original is if you are a kiwi )
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

hah funny guy - seen Trent from Punchy? that's how you aussies sound like to us :P

GK Sigma wouldn't have had those rims - the Cordia has +46mm offset like most other FWD/4WD Mitsis, the Sigma would have been about +25-32mm offset.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 29 guests