What diff is this?

bigd · Post by **bigd** » Thu Nov 06, 2008 4:22 pm

I know this has been covered and I've looked at the pics but can't tell -
It's 3.9 LSD but don't know which one - it was apparently off a US sapporo but the model number also corresponds to an 89 US starion diff so not sure!

Cheers for your help!

Post by **Alspos** » Thu Nov 06, 2008 6:55 pm

Plug hole in the bottom is where the easy to spot difference is. Small ribs around plug = bigger housing.

MainstreaM · Post by **MainstreaM** » Thu Nov 06, 2008 10:03 pm

US never got a 3.9, all we got was the 3.54

bigd · Post by **bigd** » Fri Nov 07, 2008 3:03 am

Alspos wrote:Plug hole in the bottom is where the easy to spot difference is. Small ribs around plug = bigger housing.

There are ribs around plug - like this?

dirtygalant · Post by **dirtygalant** » Fri Nov 07, 2008 6:06 am

The US never got IRS Sapporos - they were all live axle Dave

only Japan and european markets had the IRS in the A164A, and I think they were all 3.545 ratio and would have been small crown wheel with smaller 4 bolt axles.

bigd · Post by **bigd** » Fri Nov 07, 2008 3:22 pm

Cheers guys - this gets weirder and weirder. Definitely 3.9 and LSD is it JB style or bigger JD style?

dirtygalant · Post by **dirtygalant** » Fri Nov 07, 2008 4:00 pm

if it has the same part number as an 89 spec US starion it would suggest it's the larger "JD" size crownwheel.

Take the back plate off and see I guess.

My original Eterna (Sapporo) diff had a completely different casting to either Starion small or large diff housings around the drain plug, so that would be another giveaway that it's not a Sapporo diff.

Post by **Alspos** » Sat Nov 08, 2008 9:26 am

Looks like a large housing.

Austarion

What diff is this?

What diff is this?

Who is online