Hey guys,
I have a 16mm rear sway bar in my A164A Eterna which I'm finding difficult to get a polyurathane mount bush for, only off the shelf ones are for JA, JB and JD Starions with 18mm sway bars. I've tracked down a couple of import Starions for parts but both have 16mm sway bars also (they must be early models).
So does anyone in NZ (or even AU if the swaybar is cheap!) have a spare rear sway that is 18mm (or even bigger provided I can get bushes for it).
I tried getting ahold of both front and rear Whiteline sway bars but no one in NZ stocks them anymore and no one seemed to be able to get them in from AU :(
Cheers guys
WTB in NZ: Rear 18mm or bigger sway bar
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
WTB in NZ: Rear 18mm or bigger sway bar
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
well I'm more keen to get a bigger than 16mm sway bar anyway, thought a Starion 18mm sway bar would be an upgrade and would be easier to get a polyurethane bush off the shelf. Supercheap don't do a generic bush kit, but places like BNT etc do. However I would have to mess around with attaching mounts to the crossmember as on mine (and I'm sure it's the same for the Starion too) the bush mount slots into the crossmember on one side and is clamped down with a bolt on the other side.
There's nothing really wrong with my existing sway bar bushes but I've upgraded everything else to Super Pro polyurethane I may as well do the sway bar mount bushes too.
There's nothing really wrong with my existing sway bar bushes but I've upgraded everything else to Super Pro polyurethane I may as well do the sway bar mount bushes too.
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
Did you find one?? I might have one laying out in the man cave :)dirtygalant wrote:well I'm more keen to get a bigger than 16mm sway bar anyway, thought a Starion 18mm sway bar would be an upgrade and would be easier to get a polyurethane bush off the shelf. Supercheap don't do a generic bush kit, but places like BNT etc do. However I would have to mess around with attaching mounts to the crossmember as on mine (and I'm sure it's the same for the Starion too) the bush mount slots into the crossmember on one side and is clamped down with a bolt on the other side.
There's nothing really wrong with my existing sway bar bushes but I've upgraded everything else to Super Pro polyurethane I may as well do the sway bar mount bushes too.
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
nah mate couldn't find one - if you could find one in your cave that would be primo! ;)
How was the UK? Get heaps of sweet pics?
How was the UK? Get heaps of sweet pics?
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
The UK was GREAT!!!!dirtygalant wrote:nah mate couldn't find one - if you could find one in your cave that would be primo! ;)
How was the UK? Get heaps of sweet pics?
Had a fab time.
Didnt see one starion tho :( just lots of euro trash
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
Who is online
Users browsing this forum: No registered users and 99 guests