Some new Goodies

Website · Post by **WidebodyWoody** » Fri Aug 22, 2008 3:52 pm

:D These goodies arrived for me at work today. VERY EXCITE :D :D :D

groupAralliart · Post by **groupAralliart** » Sat Aug 23, 2008 4:51 pm

Shit! you will need to order another 3 :D

thrash · Post by **thrash** » Sat Aug 23, 2008 6:23 pm

nah.. those things are crap.. i'm sorry to say you've wasted your money..

what you should do.. is give that crappy stuff to me and then buy some better quality stuff :D

Website · Post by **WidebodyWoody** » Sun Aug 24, 2008 12:24 am

HAHAHA

Yeah what you see there only cost me $900AUD

Station · Post by **Station** » Sun Aug 24, 2008 4:24 am

Are the forged?

OLD FART · Post by **OLD FART** » Sun Aug 24, 2008 5:08 am

Station wrote:Are the forged?

Yes

Post by **TOMSUN** » Sun Aug 24, 2008 7:30 pm

WidebodyWoody wrote:HAHAHA

Yeah what you see there only cost me $900AUD

Damn that's cheap!... I paid $1000 for the same pistons and $600 for the rods only 18 months ago!!!

Website · Post by **WidebodyWoody** » Sun Aug 24, 2008 10:17 pm

Yeah I know, they are nuts. Thats why I get them from the states. Only took 4 days to get to me as well. I did order them AGES ago, but I order them with ACL Race bearings as well. However their supplier was stuffing them around, and I would still be waiting, but I told them not to worry about the bearings, and I just got these. They posted them the day I said that, on a monday, and they were in my hands on the friday morning. I would have had them thursday, but DHL told me they dont deliver to a PO Box, so I had to get them sent to my work the next day.

:beer

For anyone interested, I ordered from Speedclinic. They are off Ebay, but you email them, and they make up any order you wish. That was $900AUD (there abouts, give or take $10 or so) which included postage. It was about $750USD before postage.

And yes, these are for the 4G63 :beer :beer

Komeuppance · Post by **Komeuppance** » Mon Aug 25, 2008 2:39 pm

Isn't ACL from the Land Down Unda??

Those slugs come with rings??

-Robert

Website · Post by **WidebodyWoody** » Mon Aug 25, 2008 9:58 pm

Not sure where ACL is based, but I had the money on hand, so I was going to get them. But either way, I can pick the bearings up for same price here.

Pistons with Pins and rings, and the rods with the rod bolts. All is here, except the bearings.

:beer

www.18u · Post by **www.18u** » Tue Aug 26, 2008 10:23 am

What pin size Woody? 21mm or 22mm. What block and crank are you running?

Website · Post by **WidebodyWoody** » Tue Aug 26, 2008 12:41 pm

Starion block with starion crank.

redzone · Post by **redzone** » Tue Aug 26, 2008 11:04 pm

so 21mm then.

and yes acl is an australian company.

buy king bearings though woody

Website · Post by **WidebodyWoody** » Wed Aug 27, 2008 9:32 am

king bearings better? Ok Thanks I will look into it. I only know info about pistons and rods, and I am happy with what I got. I don't know too much about bearings or gasket stuff yet. (Head gaskets). Is the Twin cam head good enough to not require getting it O Ringed? Cheers

S0LJAH · Post by **S0LJAH** » Wed Aug 27, 2008 2:31 pm

all the evo guys etc in nz recomend the factory mitsi triple layer jobbie headgasket

cant find the part number at the mo as the mitsi forum is down but will post it up when i do

good for up to 400 hp and is around NZ$100 :D

Austarion

Some new Goodies

Some new Goodies

Who is online