deep dish rims

JustPaus_88TSi · Post by **JustPaus_88TSi** » Wed Jul 23, 2008 9:55 am

I was thinking, maybe the Enkei rims had a 8's with zero offset..

redzone · Post by **redzone** » Wed Jul 23, 2008 1:18 pm

phil's car has normal widey wheels. wonder if the jap ones are different to the us spec ones????

tri26t · Post by **tri26t** » Wed Jul 23, 2008 3:39 pm

Its rainin pretty hard up here so
you ppl better appretiate this,,,????,,,
8x16 0 and 20mm hub savers

then back spacing of 120 mm

I took a sh-t load of pics but that shoulb be enough.

Cheers: Phil.

Xentro · Post by **Xentro** » Wed Jul 23, 2008 6:01 pm

That's odd..

Makes me want to check what I've got on my euro spec widey.

redzone · Post by **redzone** » Wed Jul 23, 2008 6:41 pm

and ditto myself, i'll be checking mine for sure!

thanks for the pics phil!

JustPaus_88TSi · Post by **JustPaus_88TSi** » Wed Jul 23, 2008 8:17 pm

Weird.

I just checked mine again, the back spacing is 105mm.

What the hell is going on here? LOL

tri26t · Post by **tri26t** » Wed Jul 23, 2008 8:52 pm

can anyone say if they have used the 20mm
spacers with thier 8" rear wheels.

Oh and are all the stock widebody wheels
made by ASAHI Wheels japan ??.

Cheers: Phil.

redzone · Post by **redzone** » Wed Jul 23, 2008 11:33 pm

phil i reckon u could use a 40mm spacer with those 0mm offset wheels.

i fully expect those pics you posted above to be famous on every american starion website in about ooh 2 hours LOL

if mine and the other's jap spec wideys have 0mm offset wheels that'd be interesting. just need anthony to have a squiz at his UK spec!!!

i reckon we've stumbled upon a starion anomaly here!

JustPaus_88TSi · Post by **JustPaus_88TSi** » Thu Jul 24, 2008 7:41 am

As for a fitting a 8" rear with -20mm offset, yes it can be done.

I run 10.5" rears with a -3mm offset, which makes the lip of the rim go 15mm past a 8"(-20mm).

Redzone, too late. I already posted about it on SQC last night. LOL

redzone · Post by **redzone** » Thu Jul 24, 2008 5:40 pm

^^^ LOL

you're too quick for me...

and TAH DAH

mine are the same! so it looks like a difference between the GSR-VR and the american starquests.....

but what about the euro spec??????????????

Xentro · Post by **Xentro** » Thu Jul 24, 2008 5:59 pm

I'll see if i can take a couple pics this evening or coming weekend.

groupAralliart · Post by **groupAralliart** » Thu Jul 24, 2008 6:05 pm

Anthony's Euro widey wheels which I had on mine to measure up were:
Wheel sizing stock
F-205/55 16X7" +18
R-225/50 16X8" -10

tri26t · Post by **tri26t** » Thu Jul 24, 2008 6:23 pm

I still want to get as much reverse dish
as possible like maybe these,
http://www.jdm-wheels.com/used.html

Kranze Cerebus
18x11 -17 18x13 -3
Insane lip, Insane Fitment
5 Lug PCD: 114.3

now thats a wheel, Back in the day I had the xr-GT
falcon,most monaro`s, SLR`s, infact most Holdens
times 5, and I always put the biggest wheels on them
(why) "because I could"

So Dave does this mean your wheels are about 2.5"
away from the inside lip of the guards then ????

Cheers: Phil

tri26t · Post by **tri26t** » Sat Jul 26, 2008 12:05 am

more of the wheels I want here,

http://www.showwheels.com.au/wheels/sho ... p?Series=8

now thats what "I call DISH" (i know you`re gonna call it "LIP")
but these is close to my goal.
Cheers: Phil.

redzone · Post by **redzone** » Sat Jul 26, 2008 5:59 am

nah thats dish alright, lip is what u get when u have a shit offset wheel thats trying to look like dish (like those "racing sparco" wheels u used to see on excels all the time years ago...

havnt measured the wheels that were on mine phil, but u know the ones that used to be on it dont you??

Austarion

deep dish rims

Who is online