BIG LSD 3.9 DIFF GEARS WANTED

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
BILLLAKSTINS
Newcomer
Posts: 8
Joined: Tue Jul 08, 2008 8:22 am
Location: Adelaide

BIG LSD 3.9 DIFF GEARS WANTED

Post by BILLLAKSTINS »

Hello guys and gals, new to the forum although have bought gear from Oscar in the USA but where did he go? You all have some very impressive Starions on this forum that area credit to you. my problem is>>>>I have a tarmac rally staz fitted with the big lsd running 4.8 gears. we ran this combo in last years Classic Adelaide Rally (pre 1990 cars) and it was quick except no top end(190ks) the fast sections require 250ks to run with the gun 911's so we are in dire need of 3.9's that will give us 241ks top speed. can anybody assist please, are any big lsd carrier 3.9's 4 sale. 4.2's second choice. We knocked off plently of the bigger budget ( up ourselves) Porsche teams last year and plan to come back and give then a real going over in the underdog heavier Starion. Cheers Bill 0417 882 781 ( Adelaide)ps.. thanks to Alan for getting me on the network tonight.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

you need to look at mitsubishi L200 2wd utes i believe, also check tritons etc i'm not sure exactly what they came in here but L200 is rumoured to be the one!
cheers, dave.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Lunacy
nearly postwhore
Posts: 1355
Joined: Fri Jul 22, 2005 3:31 pm
Location: Land of Confusion

Post by Lunacy »

Welcome to the forums :) U should be able to get the gears from the USA, try www.starquestclub.com
Wont be cheap shipping though id imagine.
As for Oscar, his wife posted up on SQC a month or so ago and says he's pretty sick so i think thats why he hasnt been around.
Image
BILLLAKSTINS
Newcomer
Posts: 8
Joined: Tue Jul 08, 2008 8:22 am
Location: Adelaide

Post by BILLLAKSTINS »

sorry to hear about Oscar & thanks for the L200/Triton tip Dave, I have basicly finished the car ready for testing and the diff is the last piece in the puzzle. Hanging out for 3.9's but will go with 4.2 L200's gears if/when we run out of time. Where is the Redzone workshop? have heard about serious quality work out of your place!
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

BILLLAKSTINS wrote:sorry to hear about Oscar & thanks for the L200/Triton tip Dave, I have basicly finished the car ready for testing and the diff is the last piece in the puzzle. Hanging out for 3.9's but will go with 4.2 L200's gears if/when we run out of time. Where is the Redzone workshop? have heard about serious quality work out of your place!
cheers for the compliment :beer my workshop is located in maroochydore in queensland, about 100km north of brisbane. i think the 2.0 and 2.6 L200's have different ratios. i'd be checking workshop manuals etc for specs, should give you an idea of what to look for..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Welcome aboard Bill :beer
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

ive got a 3.9 in mine (not willing to part with) but id say a 4.2 will be better suited to what your after. Unless your racing on long straights all the time.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

Id be keen on a 4.2 set up as Ill be running the Mazda gear box and Im sure thats what they have...

By "the big diff" do you mean the 8.5 inch? cause the widebodys that had 6 bolt axles had a 9 inch. The first starions had a 8 inch diff.

The 8.5 inch 4.2 gears are what Im after.
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
tri26t
I love starions
Posts: 484
Joined: Fri Nov 26, 2004 7:19 pm
Location: townsville

Post by tri26t »

I have 6 bolt axles Thugh I dont know bout the 9" centre ????????

Cheers: Phil.
TORQUES-CHEAP.
shift1313
Big Dorifto
Posts: 75
Joined: Fri Jul 04, 2008 10:31 pm
Location: Blacksburg, VA USA

Post by shift1313 »

here in the states the diffs were the same except the 88-89 had 6bolt axle shafts. there were lsd and non lsd diffs tough and different variations of torque tubes.

As for gears over here we use gears from the trucks. Mighty max/dodge d50, montero/raider(not sure of the nomenclature over there). You can still get the gears new and there was a company that was selling them(fuel injection specialties), but i dont know if they are still around. I believe the 3.9 fits the stock housing and the 4.11 required some clearance but if you are running 4.8 id say you have the clearance. The only difference is the back lash spacing id different on the truck diff so if you buy a kit for a truck you will need additional back spacing.



Montero with leaf springs: 83-87: Varies from year to year on what trucks got what.

4.625 = MB185463
4.875 = MB527147
4.222 = MB185462

Montero 3.0 with coil suspension: 89-91: all years one option.

4.625 = MB598210

Montero 3.0: 92-96: varies in different options for all years

4.625 = MB598210
4.875 = MB598487
4.636 = MR162750

Montero 3.5 DOHC: 94-00:

4.636 = MR124857
4.272 = MR296349

Montero 3.5 SOHC V6 24V: 01-02

Can't pull information up on this one yet.

Montero 3.5 SOHC V6 24V: 03

Can't pull information up on this one yet.

Montero Sport: 2.4: 2WD: 96-99: only one option for these years.

4.222 = MB185462

Montero Sport: 3.0: 2WD: 97-03:

4.222 = MR162749
4.636 = MR162750
4.900 = MR296348

Montero Sport: 3.5: 2WD: 99-03

4.272 = MR296349
4.636 = MR124857

Montero Sport: 3.0: 4WD: 97-03

Wont let you select the gears.

Montero Sport: 3.5: 4WD: 99-03

4.272 = MR296349
4.636 = MR124857
4.900 = MR124858

Mighty Max: 2.0: SWB/2WD: 87-89: only one option.

3.909 = MB185461

Mighty Max:: 2.6: SWB/2WD: 87-89: only one option.

3.545 = MB185460

Mighty Max: 2.4: SWB/2WD: 90-96 only one option.

3.909 = MB185461

Mighty Max: 2.6: LWB/2WD: 87-89

3.545 = MB185460
4.222 = MB185462

Mighty Max: 2.4 LWB/2WD: 90-95

4.222 = MB185462
3.909 = MB185461

Mighty Max: 2.6 LWB/4WD: 87-89

3.909 = MB185461
4.222 = MB185462

Mighty Max: 3.0 SWB/4WD: 90-95

4.222 = MB527248

Mighty Max: 2.6 LWB/4WD: 87-89

3.909 = MB185461
4.222 = MB185462

Mighty Max: 3.0 LWB/4WD: 90-91

4.222 = MB527248
84 Starion ES
BILLLAKSTINS
Newcomer
Posts: 8
Joined: Tue Jul 08, 2008 8:22 am
Location: Adelaide

Post by BILLLAKSTINS »

Thanks for that info, i have the large housing diff ( purchased of a guy who was trying to fit the lsd carrier into a Scorpion????. It was all in bits and the 4.8 gear set was in the box also, i just machined up the side carrier spacers that were missing. Oscar then supplied the shorter torque tube to suit and i am using the 4 bolt shafts. Im assuming all the commercial utes L200, Triton and Mighty boy are all fitted with these larger gear sets. I have tracked down a 90 2wd Triton 4 wrecking, its vin number lists an OE 4.2 ratio, when i get time I will strip and measure for compatability and post the results. Cheers,
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

hey shift any chance u could post a pic of a mighty max so we can see what its sold as here? think it might be a triton.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
shift1313
Big Dorifto
Posts: 75
Joined: Fri Jul 04, 2008 10:31 pm
Location: Blacksburg, VA USA

Post by shift1313 »

this is what 87+ looked like

Image

i had an 86, 86 and older had a little different body style here in the states but they are hard to find pictures of. They came in 2wd and 4wd varieties, 2.0l, 2.6l and the later ones also had 3.0v6. same platform as the montero/pajero with extended frames i thnk.
84 Starion ES
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yep that looks like a triton, we didnt get a short wheelbase version here though i think?
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 33 guests