LSD 3.9

dirtygalant · Post by **dirtygalant** » Thu May 29, 2008 12:24 pm

Sounds like a good deal. Interesting that it's a 3.9 though - they should be 3.545.

airbats801 · Post by **airbats801** » Fri May 30, 2008 5:45 am

good info. Found out I can still machine the starion lsd down a little to fit in a sapporo rear end. :)

dirtygalant · Post by **dirtygalant** » Fri May 30, 2008 9:27 am

Please let us know if you go ahead with this, because there are alot of guys here wanting to put Starion LSDs into their EX Lancer and Sigma live axles.

airbats801 · Post by **airbats801** » Fri May 30, 2008 6:05 pm

this is the info I got from oldcolt off the classic colt forum.

--------------------------------------------------------------------------------

It does need some machining. The side bearings on all Starion diffs are larger so you need to turn down the bosses to suit the original bearings.

Look into the front axle of pickups for different gear ratios.

--------

I'm going to be picking up a sapporo tomorrow most likely, and I will definately be trying this route out. I was thinking about buying the works lsd up right now for the early cars, but I figure the 2.6 turbo im swapping on could use a stronger rear end.

ProZac · Post by **ProZac** » Mon Jun 09, 2008 11:28 am

Good score, buy it.

Austarion

LSD 3.9

Who is online