Dyno sheets from kit

Display your ride and post power figures, dyno runs, drag and circuit times.
Post Reply
User avatar
davidbek95
I've been here before
Posts: 249
Joined: Thu Jan 08, 2004 7:59 pm
Location: beautiful QLD (mackay)

Post by davidbek95 »

Congrats Kit for getting 300hp mark,it good finally see someone on this forum has done it,Chris C done this 10years ago.
Top
Sigma_turbzz
Lil' Dorifto
Posts: 49
Joined: Sun Jun 17, 2007 4:37 pm
Location: S.A.

Post by Sigma_turbzz »

Not sure why your mentioning btl again. 300hp is not something worth telling your neighbours about. Look at the dyno sheet again it says 16psi. Hopes your 300hp was at 16psi also otherwise you've got some competition :wink:
Top
User avatar
kit
Enthusiast king
Posts: 788
Joined: Sat Sep 17, 2005 11:43 am
Location: Brisbane

Post by kit »

Whats the record do i need to spend more my tuning guy said he can break 400hp with that engine what i don't want to do is break difs and gear boxes :D
1982 Ja single cam 4g63 342.6bhp @ the wheels full show car imaculate
1985 Jb Fully stock original imaculate
2005 Ford Transit Jumbo & 2008 transit mwb
2008 VW Caddy Maxi 2006 hiiace commuter
2010 Toyota pardon kakadu and 2011 hiiace
2010 and 2013 VW Crafter 50 OH
2012 GLX R triton
Top
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

For a SOHC 2.0 thats still around i think Troy ( Bodeo ) had made around 350hp at the wheels before.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
Top
Sigma_turbzz
Lil' Dorifto
Posts: 49
Joined: Sun Jun 17, 2007 4:37 pm
Location: S.A.

Post by Sigma_turbzz »

350hp on race fuel though
Top
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

I dont think it was a full race fuel mix, I think it was 50-50.

Could be wrong though.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
Top
User avatar
bodeo
Big Dorifto
Posts: 94
Joined: Mon Apr 26, 2004 12:05 pm
Location: Melbourne

Post by bodeo »

We ran a 50-50 mix and it made 355whp. The limiting factor was the turbo exhaust housing and dump pipe - T3 from an RB25 machined to take a 550 roller and a high mount dump pipe.

The turbo exhaust housing and dump pipe will probably be for sale soon - Tested to 355whp for any punters :) – PM me if interested.

Chris Collier has made the 450whp mark on race fuel from a 2 litre single cam, but this is pushing the engine harder than he would a customer’s street car.

I’m happy with 300whp as a daily driver, and I guess the only reason I want more is to upset Dave :) Seriously, it will be great for the starions to have a few street cars chasing for the 400 mark. A great effort from kit to comfortably make 300.

Dave - I hear you are chasing turbo bits :) You should ask Chris what i've got planned this summer.
Top
User avatar
davidbek95
I've been here before
Posts: 249
Joined: Thu Jan 08, 2004 7:59 pm
Location: beautiful QLD (mackay)

Post by davidbek95 »

Yes kit you are right on the mark there,yes i have hurt my gearbox,but i got recondition one waiting to go in,i can take mine to work or at home and rebuild my box,troy i don't want hand me downs from you,as i want to be in front of you as where i am already there in my dreams. :beer
Top
Post Reply

Return to “Show And Go”

Who is online

Users browsing this forum: No registered users and 0 guests