FS: Widebody Starion 1988 5 speed ***$8,000*** #SOLD#
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
Re: ...
owning a widebody is completely unlike owning an early starion. they seriously got all the bugs ironed out by the time they arrived. i havnt had any dramas at all with mine, other than a noisy balance chain, but that comes standard on any 2.6 shitter....NachoMan wrote:Hmmm...
I'm thinking about it...
Nup, nope, NO!
I can't!
As much as I'd like a widebody, I just can't bring myself to buy another one of these cars...yet.
Not a bad price though, and if I could get away to look at it, then I'd probably consider it.
Poo! :(
all i'm saying is, dont look at it like just another starion
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
sob sob
Redzone ????????? you didnt just call
a 2.6 a shitter did you ????????
I know you didnt even thow they do have a few
problems (driver ??? )
you know if they didnt crack the blocks (too hot )
there could be a lot more power to these suckers ????
\
Cheers:Phil.
a 2.6 a shitter did you ????????
I know you didnt even thow they do have a few
problems (driver ??? )
you know if they didnt crack the blocks (too hot )
there could be a lot more power to these suckers ????
\
Cheers:Phil.
TORQUES-CHEAP.
-
- BATHURST LEGEND 07
- Posts: 948
- Joined: Sun Feb 18, 2007 4:46 pm
- Location: Brisbane
-
- nearly postwhore
- Posts: 1589
- Joined: Sat Jan 10, 2004 12:28 pm
- Location: Perth (Morley), WA
- Contact:
...
to be brutally honest, the 2.6l is probably one of the reasons why i wouldn't like to own a later model Staz.
I think Mitsubishi hit the jackpot when they created the DASH 4G63.
Of course by today's standards, it might seem a little archaic though...
I think Mitsubishi hit the jackpot when they created the DASH 4G63.
Of course by today's standards, it might seem a little archaic though...
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
Re: sob sob
nah 2.6 rodeo motors are awesome :Dtri26t wrote:Redzone ????????? you didnt just call
a 2.6 a shitter did you ????????
I know you didnt even thow they do have a few
problems (driver ??? )
you know if they didnt crack the blocks (too hot )
there could be a lot more power to these suckers ????
\
Cheers:Phil.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Re: sob sob
As an owner of both I call BS. :Dredzone wrote: nah 2.6 rodeo motors are awesome :D
The 2.6 is very lazy to drive compared to the 2.0L. No question that stock the 2.0L shits from a great height. Modified is a different game however.
4G63 - 87kg
4G54 - 107kg
4G54 - 107kg
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
The 4G63 just has that legendry status.
Ask someone to name a Mitsubishi engine code, most would say 4G63.
Ask someone to name a Mitsubishi engine code, most would say 4G63.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
The 2.6 can shit all over the 2.0 SOHC motors. Not in its stock form, mainly because of the flow of the head, and the Eco Cam.
However a DOHC head is another ball park.
If you are staying SOHC, I personally would go 2.6 because you can get more flow etc. The 2.0 is lighter etc, but I think it is personal preference in this area. DOHC is another league of its own, which shouldn't even be mentioned With SOHC rofl
However a DOHC head is another ball park.
If you are staying SOHC, I personally would go 2.6 because you can get more flow etc. The 2.0 is lighter etc, but I think it is personal preference in this area. DOHC is another league of its own, which shouldn't even be mentioned With SOHC rofl
-
- BATHURST LEGEND 07
- Posts: 948
- Joined: Sun Feb 18, 2007 4:46 pm
- Location: Brisbane
-
- Enthusiast
- Posts: 737
- Joined: Wed Feb 02, 2005 2:46 pm
- Location: oregon, USA
- Contact:
fastest time my buddy and I have managed to get a stock tbi 12a starion at 15lbs on street tires, just general all seasons on a rebuilt engine was 14.0 with a 1.960ft I think it did have a exhaust on it. If you like to rev g54b definately isnt teh one for you, if you like explosive torque down low then yuo tend to like em.
'78 Colt cp, 80 challenger "scorpion" 5spd g54bt conversion almost complete, '80 plymtouh arrow "might max" , '90 mitsu terror van "spacewagon"
80's Hero
80's Hero
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
^^^and thats the main reason mitsubishi put the 2.6 in for the american market, was because american's were more used to low revving torquey powerplants and (for the most part) wouldn't have liked to have to rev the 4G63 sohc so hard..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- Enthusiast
- Posts: 737
- Joined: Wed Feb 02, 2005 2:46 pm
- Location: oregon, USA
- Contact:
Who is online
Users browsing this forum: No registered users and 11 guests