Drag Result from Oct6

Display your ride and post power figures, dyno runs, drag and circuit times.
Post Reply
User avatar
rodhamp
I like starions
Posts: 122
Joined: Sun Nov 14, 2004 9:03 pm
Location: Devonport, Tas

Drag Result from Oct6

Post by rodhamp »

Image

1st run out, bogged down majorly at start and also had a couple of early gear changes - around 6k 1-2 and 6k 2-3, around 6.5k 3-4. Cutout is at 6.75k!

2nd run was a joke with a 2.2sec 60 ft but then major misfire issues left me backing right off and running over the line for an 18sec pass at 92kph. Gave her another crack but misfiring was worse so gave up!

If only I could have had a clean second crack at it!
1985 JB, 14.018 1/4 mile @ 162kph
quest
I love starions
Posts: 411
Joined: Fri Jan 09, 2004 7:42 pm

Post by quest »

Solid setup... should be hella capable with more seat time
Street tires ? what boost ? dyno it ?
noticed a pronounced gain with that cam ? Adj gear ? Vsprings ?
Any pics of underhood ?
airbats801
Enthusiast
Posts: 737
Joined: Wed Feb 02, 2005 2:46 pm
Location: oregon, USA
Contact:

Post by airbats801 »

Definately need some better tires to get out of the hole. Nice trap speed. That should easily be in the mid 13s. I ran a 13.69@100.9mph on a widebody and a 2.0760ft so that thing should be in the low 13s? Are you running lsd?
'78 Colt cp, 80 challenger "scorpion" 5spd g54bt conversion almost complete, '80 plymtouh arrow "might max" , '90 mitsu terror van "spacewagon"
80's Hero
Image
User avatar
rodhamp
I like starions
Posts: 122
Joined: Sun Nov 14, 2004 9:03 pm
Location: Devonport, Tas

Post by rodhamp »

quest wrote:Solid setup... should be hella capable with more seat time
Street tires ? what boost ? dyno it ?
noticed a pronounced gain with that cam ? Adj gear ? Vsprings ?
Any pics of underhood ?
Yeah was on street tyres with an LSD. Plenty of potential with the start for better times, track had more grip than I expected and I was trying to avoid getting massive wheelspin which is why I bogged down at the start (no wheelspin).

Hasn't been dynoed yet, running around 18psi with standard cam gear. The valve springs were new and I think they may have been tighter than factory, but cannot say for sure. Got them when I got the new cam - it made heaps of difference, much more kick up the mid and top end, turbo helped that too though! Will try and get a pic up soon.
1985 JB, 14.018 1/4 mile @ 162kph
User avatar
rodhamp
I like starions
Posts: 122
Joined: Sun Nov 14, 2004 9:03 pm
Location: Devonport, Tas

Post by rodhamp »

Got off my lazy ass and took some pics:

Image
Image
Image
Image
Image
Image
Image
Image
1985 JB, 14.018 1/4 mile @ 162kph
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

Rodhamp wrote:
Got off my lazy ass...
Man you sound so like me at the moment. :oops:

btw - good times - well done. :beer
Never argue with an idiot, it brings you down to their level and they beat you with experience.
quest
I love starions
Posts: 411
Joined: Fri Jan 09, 2004 7:42 pm

Post by quest »

looks good! Whats that cylinder looking thing near the throttle body?
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

quest wrote:looks good! Whats that cylinder looking thing near the throttle body?

the blue thing is a blow off valve
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

thats one hell of a bog down! and quest that cylinder looking thing appears to be an oil/air seperator of sorts...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
rodhamp
I like starions
Posts: 122
Joined: Sun Nov 14, 2004 9:03 pm
Location: Devonport, Tas

Post by rodhamp »

redzone wrote:thats one hell of a bog down! and quest that cylinder looking thing appears to be an oil/air seperator of sorts...
Correct on the air/oil separator, it has a hose that drains back to the sump. She was a bad bog down, I could have nearly run the first 60' quicker than my car went :oops:

My second crack wasn't too bad initially but then she started acting like a bitch, misfiring like there was no tomorrow :wtf:
1985 JB, 14.018 1/4 mile @ 162kph
jeff
I've been here before
Posts: 219
Joined: Tue Dec 12, 2006 9:36 am
Location: u.s.a. Oregon

Post by jeff »

nice tubing and cold air sheild!!
Image
airbats801
Enthusiast
Posts: 737
Joined: Wed Feb 02, 2005 2:46 pm
Location: oregon, USA
Contact:

Post by airbats801 »

watch out, you could suck small children into that turbo intake :D
'78 Colt cp, 80 challenger "scorpion" 5spd g54bt conversion almost complete, '80 plymtouh arrow "might max" , '90 mitsu terror van "spacewagon"
80's Hero
Image
Post Reply

Who is online

Users browsing this forum: No registered users and 33 guests