$600 JB in perth!!!!!!!!

silo · Post by **silo** » Thu Oct 04, 2007 11:47 pm

Noddy wrote:Got some contact details Silo? :)......... just reread it -i assume its near Freo? :)

Hamilton Hill Noddy! Someone go get it PLEASE!

P.S.- Will your wife let you have another one John?

JPC · Post by **JPC** » Fri Oct 05, 2007 2:58 am

I went and had a squiz at this today, being totally unable to resist the temptation. I tried really, really hard, but I'm still a chronic MSS sufferer

Not quite in as good condition as it might look in the photo, but....

There is quite a bit of surface rust, but that shouldn't be too much of a problem. Windscreen is cracked, and there is rust under the windscreen; looks like previous accident damage on rear passenger quarter; centre console removed; dash incomplete; the interior is nominally black, but the rear seats are a different colour; various dings on the body, worst in the passenger side door. Has a red JA bonnet, white headlight covers, no front fenders (but there are some other fenders in the back yard). The rear 3-piece spoiler appears to be factory, but I couldn't verify because I couldn't see the mounting points (too much stuff in the car).

Overall, nothing too serious. The 'missing' compliance plate is in the rear, on the chassis bar just behind the rear seats (I believe this is where the JD ones were - can someone confirm?). I saw it, but couldn't read it because there was too much crap in the way (extra front seats, all sorts of other stuff).

There would be mainly a lot of body prep work and some interior work in getting this restored, and then obtaining missing parts (including engine - there is a block/cyl head still there in unknown condition, but that's all.

Bottom line is I would buy this if:
(a) I had the space (I would only have the space if I got rid of my JA shell, but it's in better nick than this beastie)
(b) I made some outrageous promises to my wife that I couldn't possibly keep.

However:

Noddy and I spent quite some time on the phone tonight talking about this, so stay tuned

I also had a peek at the silver JA - this one has a Haltech ECU with the standard JA injection setup. No idea how it runs, but the overall condition of the car was pretty sad.

redzone · Post by **redzone** » Fri Oct 05, 2007 7:36 am

^^^ so didnt look at the rhf strut tower then??? :(

silo · Post by **silo** » Fri Oct 05, 2007 10:17 am

Also the drivers side rear tail light is busted from memory and there is no fuel tank!
If you fellas dont grab it im gonna call the owner when he gets back and see if i can buy the rear wing for my car.... i liked it :drool:

Silas

JPC · Post by **JPC** » Sat Oct 06, 2007 2:13 am

silo wrote:If you fellas dont grab it im gonna call the owner when he gets back and see if i can buy the rear wing for my car.... i liked it :drool: Silas

No! Stay down in Busselton, Silas

Noddy · Post by **Noddy** » Tue Jan 22, 2008 9:57 pm

this still available - spoke with him today :)
Still wants $500

MR Bender · Post by **MR Bender** » Tue Jan 22, 2008 9:59 pm

Noddy wrote:this still available - spoke with him today :)
Still wants $500

Starting a collection Ray!! :D

Noddy · Post by **Noddy** » Wed Jan 23, 2008 12:26 am

maybe if a collective wanted certain parts we may make it worthwhile to strip........
i need a rear LHS light !
JPC wants the rear spoiler...... so does some guy in the east
What do you need? :D

groupAralliart · Post by **groupAralliart** » Wed Jan 23, 2008 11:16 am

driving lights and aerial

redzone · Post by **redzone** » Wed Jan 23, 2008 4:37 pm

so did u ever find out if its a JB or a JD?????

Noddy · Post by **Noddy** » Wed Jan 23, 2008 5:38 pm

90% sure its a JD

JD_Stazza_Brendan · Post by **JD_Stazza_Brendan** » Wed Jan 23, 2008 5:58 pm

Next time u talk to the guy ask him what the VIN number is. All you really need to know is the first few letters and the last few numbers.

That way we can tell if its JB/D and what number it is.
VIN will be on drivers strut top.

MR Bender · Post by **MR Bender** » Wed Jan 23, 2008 6:32 pm

ill get the vin number for you !
it is a jd but i will get him to check anyway!!

JPC · Post by **JPC** » Thu Jan 24, 2008 12:41 am

Noddy wrote:90% sure its a JD

I'm 120% sure it's a JD

redzone · Post by **redzone** » Thu Jan 24, 2008 8:02 am

and you're gonna pull it apart?

it is saveable isnt it?

wish it was on the east coast.....

Austarion

$600 JB in perth!!!!!!!!

Who is online