Austarion

Hi Guy's

Here are some up-dated photo's. All the hoses have been done by Enzed since these were taken.

Thanks again to fr33z3 for hosting them :beer

Thanks to Top Racing in Bentley for there help :beer

Engine Bay from passenger side
www.fr33z3.net/starions/engine_passenger.jpg

Oil coooler, Intercooler & Radiator
www.fr33z3.net/starions/coolers.jpg

Engine from the top, taken from the driver side
www.fr33z3.net/starions/engine_top_driver.jpg

Pic of the Turbo and pipe's
www.fr33z3.net/starions/engine_top_turbo.jpg

Photo from underside of the wastegate and screamer pipe
http://www.fr33z3.net/starions/wastegat ... _copy1.jpg

The dreaded gearbox adapter plate
www.fr33z3.net/starions/adapter_plate.jpg

3" exhaust side pipe from under the car
www.fr33z3.net/starions/side_pipe.jpg

Photo taken from the front of the engine also showing the cam gears
www.fr33z3.net/starions/engine_front.jpg

Time for the Bling Bling and pssssshh sound
www.fr33z3.net/starions/bov_catch_can.jpg

I covered the dash and fitted Autometer guages + warning lights, the shift light is not yet fitted
www.fr33z3.net/starions/dash_copy1.jpg

Its hard to take a picture of the roll cage but i thought i would give it a go. Looks a bit messey as the car is full of parts, wiring ect
www.fr33z3.net/starions/cage_from_rear_copy1.jpg

Pic of the 38ltr plastic race tank mounted on custom alloy brackets and clamps. I have cut a hole in the base of plastic tank and bolted a surge tank over the hole. The surge tank then slides thru a hole in the floor of the boot. This saves me from using a lift pump. This pic also shows the Moroso cool can. I have a pic of the underside if you want to see it.
www.fr33z3.net/starions/fuel_tank.jpg

Ash

Very nice.... :beer :beer

jelousy = me!

wish i had your engine looks sweet!!!! :drool:

you should be towling up people on the circuit!

iXNAY wrote: you should be towling up people on the circuit!

I hope so, but the 36mm restrictor will make it hard to get the V8's

Ash

Man thats cool.

Thats going to be a very noisy beast once that turbo starts roaring :D

StazzyBabyYeah wrote: Thats going to be a very noisy beast once that turbo starts roaring :D

It better be! :D

Hey Barney hope you did a drawing of the gearbox adapter plate?

Looking great Barney :) Whens the big debut?

mrb1 wrote:Hey Barney hope you did a drawing of the gearbox adapter plate?

Hi Mark

No, I was rushed getting the engine in. But im sure the gearbox will be out again soon

Ash

NXTIME wrote:Looking great Barney :) Whens the big debut?

Well thats a good question :?

Next race is the 8th and 9th of April BUT. It still needs wiring and painting.

I would like to have it running by mid April!

I cant wait to hear it running with rotational idle thru a side pipe with no muffler Then come on boost with 26psi and open the wastegate and scream Scream Scream Scream you BASTARD

Ash

Excellent, Ash!

Expect a visit from me soon, but cover it with plastic first to protect it from all the drool

JPC wrote:Excellent, Ash!

Expect a visit from me soon, but cover it with plastic first to protect it from all the drool

hi ya John :)

as long as its only drool

Thats class ash!, cant wait to see the photos of when it's all done and ready to kick ass twisted:, oh and the photos with the speed blur lines as you zoom around the track hehehe. go the saporro!

Looks great barney, cant wait to see some photos of it on the track. :beer

Thanks guy's :beer