spec of my starion

ukstariont3 · Post by **ukstariont3** » Fri Feb 10, 2006 8:11 am

here is the spec of my 1987 2ltr starion w/b.

it has a stainless 2.5" exhaust, sweeping down/dump pipe, garrett t3 hybrid, chipped, apexi afc, turbo timer, gizzmo boost controller, k&n cut airbox.
soon to have wisco forged pistons, cometic mls head gasket, ported /polished head to hks racing spec, act clutch(heavey duty cover- street disc) fidanza alu flywheel.
currently running just under 240bhp/ 250lb/ft torque
Dave
afraid i have not figured how to post images yet :x :glare:

gotrice? · Post by **gotrice?** » Fri Feb 10, 2006 10:22 am

all you need was this part of that address

http://i41.photobucket.com/albums/e299/ ... anlow1.jpg

Then just wrap it in the "Img" tags

Like so

ukstariont3 · Post by **ukstariont3** » Sat Feb 11, 2006 2:41 am

ah, i see. thanks for that :D :D

what a lovely day!!!!!!!!! :?

last two pics were from a car show- it rained most of the weekend :x
mines the white one in the middle, the red one is BILTELS- who also has the track day car etc.
let me know what you all think. :D

ps-
(the black one, the owner got given for nothing!!!!!!! :o )

Junkers · Post by **Junkers** » Sat Feb 11, 2006 5:56 am

That last picture is great :D Nice to see a tidy white widebody.

How much boost are you running?

ukstariont3 · Post by **ukstariont3** » Sat Feb 11, 2006 7:17 am

about 18psi +/-. thats why the forged pistons etc are being fitted as i have started to frie the piston rings

once fitted, should be around 20 psi. :D
hoping the torque will be better with the flywheel n clutch combo- fidanza flywheel wieghs in at around 10lb, factory one is 30lbs +, so should make it a bit quicker off the line too. and the act combo i have can hold upto 440lb/ft torque :D

redzone · Post by **redzone** » Sun Feb 19, 2006 11:20 pm

sweeeeeet mate looks excellent. envy the fella with the black one! so u can get a fidanza flywheel for the 6 bolt crank? will have 2 investigate that!!

ukstariont3 · Post by **ukstariont3** » Thu Feb 23, 2006 4:45 am

yes mate. it is the flywheel for the 2.6 starion. it will fit, but you need the clutch too, as they are diffrent sizes.
hopefully make a bit of a diffrence, so much lighter , around 11lbs ish compared to the standard 30+lbs :D

Mr Ralliart · Post by **Mr Ralliart** » Mon Mar 13, 2006 1:14 am

redzone wrote:sweeeeeet mate looks excellent. envy the fella with the black one! so u can get a fidanza flywheel for the 6 bolt crank? will have 2 investigate that!!

It'd have to be cheap man , there's a Company down here that'll make a new billet one for under $300 . :D

mrb1 · Post by **mrb1** » Mon Mar 13, 2006 8:01 pm

ukstariont3 wrote:here is the spec of my 1987 2ltr starion w/b.

it has a stainless 2.5" exhaust, sweeping down/dump pipe, garrett t3 hybrid, chipped, apexi afc, turbo timer, gizzmo boost controller, k&n cut airbox.
soon to have wisco forged pistons, cometic mls head gasket, ported /polished head to hks racing spec, act clutch(heavey duty cover- street disc) fidanza alu flywheel.
currently running just under 240bhp/ 250lb/ft torque
Dave
afraid i have not figured how to post images yet :x :glare:

Do you have a dyno sheet? 240hp sounds like a lot with stock airflow meter and TBI? Do you still have the stock cam?

ukstariont3 · Post by **ukstariont3** » Tue Mar 14, 2006 7:11 am

found my dyno sheet- 230.6 bhp, 290ish lb/ft

slightly less than i stated, but i am happy :D :D :D :D [/img]

Mr Ralliart · Post by **Mr Ralliart** » Thu Mar 16, 2006 7:11 pm

Luv ya work . :beer

Junkers · Post by **Junkers** » Thu Mar 16, 2006 10:23 pm

290ft-lb :o thats on par with an evo V.. and this is with TBI and a stock head?

ukstariont3 · Post by **ukstariont3** » Sat Mar 18, 2006 9:08 am

:D :D yer, still standard head and tbi. only work done is the t3 hybrid, chipped ecu(modded for high boost), stainless ex, flowing down/dump pipe and metal head gasket.
that rolling road was done with piston no3 runnin lower compression than the rest :D
well impressed.

cant wait for the rebuild- hoping for more

decoy · Post by **decoy** » Sat Mar 18, 2006 3:37 pm

great stuff! i'm still waiting for my free widey...

Junkers · Post by **Junkers** » Sun Mar 19, 2006 11:12 am

If deeks gets one I want one too.. pleeeeeaaasssseee

Austarion

spec of my starion

spec of my starion

Re: spec of my starion

Who is online