My JD after a wash

Display your ride and post power figures, dyno runs, drag and circuit times.
Post Reply
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

My JD after a wash

Post by JD_Stazza_Brendan »

This is my JD just after i gave it a quick clean at work while it was quiet.
Mods-
CD player
K&N Filter
Exhaust
Turbosmart E-boost2 (on order)

Future Mods-
Replaced intercooler plumbing
Plumb back BOV

Image

Image

Image
toysrus
400HP by 2007!
Posts: 2128
Joined: Wed Feb 18, 2004 7:59 pm
Location: adel

Post by toysrus »

Someone please photochop some nice Widebody wheels onto that Staz before I run outta here in shame down the road to ROHs' factory and burn it down :twisted:
User avatar
bigmoz
Enthusiast king
Posts: 886
Joined: Thu Jan 22, 2004 1:04 pm
Location: Melbourne Australia

18"

Post by bigmoz »

In order to post an image of the picture onto the site, copy the following:
Image


bigmoz :pimp
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember

82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

my mags

Post by JD_Stazza_Brendan »

I dont think the mags are that bad. They were on the car when i bought it and they suit the car. If only they were an Inch or 2 bigger in diameter.
On my wish list is a set of either of these mags.
I will probably buy a set after ive finished everything else.

Image

Image
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

ROH, thats like a ford and holden alloy wheel, Starions demand something special.

I like that top one you chose with the chrome outside, that a genuine 3piece rim or just looks like one??
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
User avatar
fr335tyl3r
I'm Sorta Reformed!
Posts: 2073
Joined: Tue Apr 13, 2004 3:07 am
Location: Baulkham Hills, NSW

Post by fr335tyl3r »

Lol of course its a genuine 3 piece, made by simmons. Mmmm i smell someone having to remove an arm and a leg to pay for them :P
Multipoint Conversion Underway
http://starions.fr33z3.net/mpi/
User avatar
bigmoz
Enthusiast king
Posts: 886
Joined: Thu Jan 22, 2004 1:04 pm
Location: Melbourne Australia

...

Post by bigmoz »

In order to post an image of the picture onto the site, copy the following:
Image



here you go i think this would look ok


bigmoz :pimp
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember

82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

I was leaning towards the top set. B-45s. They can also come with a polished centre and they are 3 peice...

A local mag shop said about 3K with tyres on a set of 16's
Junkers
Formerly StazzyBabyYeah
Posts: 2338
Joined: Mon Nov 08, 2004 3:16 pm
Location: Christchurch

Post by Junkers »

Simmons should give all starions a 50% discount on the fact that no other car could be more deserving. :P
Watch your speed - It's virtually impossible to pick it out of the carpet if it gets blown off the table.
flav
Austarion Occupant
Posts: 3374
Joined: Thu Apr 15, 2004 9:57 pm
Location: Melbourne

Post by flav »

Looks good Moz!
User avatar
bigmoz
Enthusiast king
Posts: 886
Joined: Thu Jan 22, 2004 1:04 pm
Location: Melbourne Australia

...

Post by bigmoz »

thanks flav,
i quit my job on monday so all i have now is my bed and computer but looks like i have a job set up to start next week untill then i cant stop my mum from calling me a quote "useless bum".


bigmoz :pimp
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember

82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
flav
Austarion Occupant
Posts: 3374
Joined: Thu Apr 15, 2004 9:57 pm
Location: Melbourne

Post by flav »

If i knew you had time off i would have got you to do some work over here!
Tell maaa that Children are an extension of their parents.... That used to piss my dad off.
User avatar
bigmoz
Enthusiast king
Posts: 886
Joined: Thu Jan 22, 2004 1:04 pm
Location: Melbourne Australia

...

Post by bigmoz »

well if you know anyone who needs a bar manager just point them in my direction i have 6 months till i finish my course then its all downhill for me


bigmoz :pimp
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember

82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
Post Reply

Who is online

Users browsing this forum: No registered users and 46 guests