My L200

Display your ride and post power figures, dyno runs, drag and circuit times.
Post Reply
User avatar
www.18u
almost postwhore
Posts: 1112
Joined: Tue May 18, 2004 12:31 am

My L200

Post by www.18u »

Ok i said i had no money and would not buy anymore cars, and i honestly didn't expect to end up with this :shock: Seeing as i couldn't sell my motor on here, i decided to look on ebay about auctioning it off, and see what sort of money they were asking. Typing in 4g63 came up with this l200 that had a starion engine transplant. I knew they came with a 4g63 standard so i clicked on it as i thought i was kinda cool.
So the add read: starion turbo conversion, tc0620g turbo, haltech, e6k, recaro seats, stereo , amp , sub, momo steering wheel, engineered and registered (motor has bad blow by). So i sent the guy a message asking the reserve, and told him i had a starion engine in my garage that he could either buy, or if the reserve was cheap enough i might buy the whole car. So 1 bid and $1009 later i won :twisted:

When i picked it up it had a cable clutch, so i knew it wasn't a starion motor and they had put a turbo on the original engine (narrow block)

Not to worry :wink: I started a second job last week going back to doing engine reco. I stripped the 4g64 head off my stazz motor, and am now rebuilding the original engine with forgies, arp rod bolts, no shafts and a cometic head gasket.

this is going to be my daily driver and i am just going to have this and the widey as my weekend toy.

I rekon it should go pretty hard if i can make 200rwkw.
Image
Image
Image
Image
Image
Image
Last edited by www.18u on Sun Jul 25, 2010 10:42 am, edited 1 time in total.
Image
Top
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

Wow! Nice buy!! There are some great bargains out there at the moment!

I like it! And utes normally get a good resale price!

So I take it you are rebuilding the existing block on the ute and not transplanting the starion engine you had for sale in?
Didn't you have the starion gearbox on the engine as well?

Anyway a good buy! :)
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
Top
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

argh i'm SO jealous!! Shannon you have all the bloody cool cars!!

And all it cost is a freakin grand???? mpi conversion.. turbo conversion :glare:
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Top
User avatar
www.18u
almost postwhore
Posts: 1112
Joined: Tue May 18, 2004 12:31 am

Post by www.18u »

I was going to convert it to hydraulic and run a stazz box, but i don't think there is enough room for the master cylinder on the firewall. Anyway i can stay narrow for now and run a supra box later, but it's only a daily anyway. First thing is to fit power steering, and get the a/c working. Apparently Sigma front ends bolt up :shock: hmmm a Ge Sigma ute :twisted:
Last edited by www.18u on Sun Jul 25, 2010 4:04 pm, edited 1 time in total.
Image
Top
User avatar
turbo_l200
Lil' Dorifto
Posts: 41
Joined: Tue Apr 20, 2010 1:54 pm
Location: Tassie

Post by turbo_l200 »

hey mate i could be a wide block starion motor and still have the clutch cable, thats how iv got my l200 set up, the gear box would be out of a 2.6 sigma witch is a wide block engine, they go very well, mines a 1971 flat tray l200 with a starion motor with wolf ecu, front mount intercooler, multi point injection and other suff lol, nice ute by the way
Top
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:
Contact redzone

Post by redzone »

yeah u could drop in a starion wideblock by using a 2.6 sigma/scorpion jap box, iirc they're identical to L200 2wd boxes, and some of the L200's may have even had this box standard...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Top
FST4RD
almost postwhore
Posts: 1223
Joined: Sat Dec 09, 2006 10:22 am
Location: Christchurch

Post by FST4RD »

That looks sweet...
5 stud conversion with some 9" shp rims all round would look sweet :D

I always wanted to do this but I could justify only being a 2 seater :(
Sold - 1987 Mitsubishi Starion GSR V DASH
Current - 1995 Subaru Legacy TT SW
- 1983 Mitsubishi Starion
Top
User avatar
www.18u
almost postwhore
Posts: 1112
Joined: Tue May 18, 2004 12:31 am

Post by www.18u »

Thanks boys, I pissed off the bodgy catch can setup and fitted a starion one, so it's not blowing oil all over the drivers side front wheel :glare:

Motor is coming out next weekend, so i will measure the bellhousing then and decide what way to go. The boys at work are trying hard to make me build a big motor for it. I think a set of forgies are going in regardless.

It came with a spare starion block and crank, 2 tco611a turbos (both shot)
a reco'd head and a split pulse exhaust manifold.
Image
Top
User avatar
Lunacy
nearly postwhore
Posts: 1355
Joined: Fri Jul 22, 2005 3:31 pm
Location: Land of Confusion

Post by Lunacy »

Shannon thats mint mate :) Will be an awesome daily driver!! 200rwkw will be plenty for that :)
Image
Top
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

Twin cam it.


Top buy, mate :) :beer
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
Top
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

Lunacy wrote:200rwkw will be plenty for that :)
lunacy, you're such a freakin liar!! as if it'd be enough rofl
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Top
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Re: My L200

Post by thrash »

www.18u wrote:Not to worry :wink: I started a second job last week going back to doing engine reco.
hmmm, will austarion members be getting mates rates?? ;)
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Top
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

and i just noticed the number plates LOL

good find.. seriously jealous lol.. but i think it's gone to the right hands :beer

sorry for the multiple posts..
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Top
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

actually...forget the twin cam, V6TT it! :D
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
Top
User avatar
Lunacy
nearly postwhore
Posts: 1355
Joined: Fri Jul 22, 2005 3:31 pm
Location: Land of Confusion

Post by Lunacy »

thrash wrote:
Lunacy wrote:200rwkw will be plenty for that :)
lunacy, you're such a freakin liar!! as if it'd be enough rofl
Haha ok 600rwkw :) i know its what i want in a daily driver :beer
Image
Top
Post Reply

Return to “Show And Go”

Who is online

Users browsing this forum: No registered users and 3 guests