Austarion

well im really bored so thought i would chuck up some pics of my starion. Brought it for $1800 bucks with rego a while back, and have put king springs all round, rear suspension bushes, front brake hoses, new jb watercooled turbo, new main and big end bearings, sump gasket and rear main, and 14x8 chevoit turbo wheels.

She dosen't go too bad for a old bus, has even 140psi compression on every cylinder.
heres the pics


[/url]

I like the rims in black. What width and profile are the Tyres?

205/60's :D

As a comparison (more for myself) with reference to the lower springs...

the
205/60/14's = 602mm tall

245/40/17's = 636mm tall
225/45/17's = 634mm tall

Doesn't look like it was going anywhere in those photos, looks like it's on a towrope! It's nice and clean looking though, someone has spent some time and coin on it.

ive spent a fair bit of coin on it.... just pulled 96rwkw on the tafe dyno last saturday :?

is that the turbo you got off me? if so, then that's exactly what my car made with that turbo when stock.. then the tuner unhooked the vac line to the fuel pressure regulator and put a screw in it.. bumped it up to 99rwkw

thats the turbo mate, im happy with it. 96rwkw and 190NM torque.

:D would have liked to crack the 100rwkw mark, but thats the goal next time.

the cars are rated at 125kw at the fly stock, so thats a good result.. means they lose about 30kw through the driveline..

:D :beer

just finished putting in 30mm extended control arms, 20mm roll center adjusters, selby's 24mm front sway bar, new ball joints, inner control arm bushes, new castor bar bushes and wide body starion tie rod ends thanks to dirty sanchez! Handles sooo much better!

also thanks to redzone for my front airdam arriving today, a lil bit of prep work and ill fit it up, gutters here i come!

Wide body tie rod ends! Good thinking.

[/img]

since this pic i have shortened the sway bar link length to get the ends of the sway bar more horiztontal.