time for some new member ride pics

Display your ride and post power figures, dyno runs, drag and circuit times.
Post Reply
User avatar
hcca
Enthusiast king
Posts: 884
Joined: Thu Jan 08, 2004 9:24 pm
Location: Brisbane
Contact:
Contact hcca

Post by hcca »

The sad state of affairs:

Image

I'll post a photo of the car itself later - the dust layer is pretty awesome. I'm expecting major work on this very soon!
Top
User avatar
Chryzla
Princess
Posts: 1320
Joined: Wed May 19, 2004 6:26 pm
Location: Adelaide, SA
Contact:
Contact Chryzla

Post by Chryzla »

http://forums.austarion.com/viewtopic.php?t=9521

didnt want to fill this thread with heaps of pics :P
1983 JA Staz
Top
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

Image
New motor for the JD

Image
Me and Kyles JA's

Mines still dead.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
Top
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

Brendan, nice looking motor :D can you still get at the plugs with the turbo in place ??? Are you using an external gate ?? who made the manifold looks very neat
Last edited by OLD FART on Sun Oct 28, 2007 6:48 pm, edited 1 time in total.
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
Top
User avatar
bigd
Enthusiast
Posts: 530
Joined: Tue Aug 15, 2006 10:08 pm
Location: Whangarei, New Zealand

Post by bigd »

hcca wrote:The sad state of affairs:

Image

I'll post a photo of the car itself later - the dust layer is pretty awesome. I'm expecting major work on this very soon!
Did your engine grow another couple of cylinders or are my eyes crap?
Top
User avatar
hcca
Enthusiast king
Posts: 884
Joined: Thu Jan 08, 2004 9:24 pm
Location: Brisbane
Contact:
Contact hcca

Post by hcca »

I welded a couple of extra cylinders on :) It's easy to do!.. actually 2JZ-GTE for those who don't know.

Old Fart - I assume you're talking to me?

- Plugs are in the top of the motor so no dramas there.

- External gate - currently 32mm, but will probably put a bigger one on

- Manifold is chinese cheapo - it's surprisingly good though - it's been modified though to reposition the wastegate.

If all goes well, this thing may be running by early 2008.. i've been saying this for a while, but i'm very determined right now. Just got to sell my Falcon first.. anyone want a low km XR6T? :)
Top
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

OLD FART wrote:nice looking motor :D can you still get at the plugs with the turbo in place ??? Are you using an external gate ?? who made the manifold looks very neat
Should be able to get to plugs still. External gate will be going on there. Manifolds not finished as waiting to fit motor to car before deciding on wastegate position.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
Top
User avatar
bigd
Enthusiast
Posts: 530
Joined: Tue Aug 15, 2006 10:08 pm
Location: Whangarei, New Zealand

Post by bigd »

hcca wrote:I welded a couple of extra cylinders on :) It's easy to do!.. actually 2JZ-GTE for those who don't know.
Holy Crap! What are you going to call it - Mitsubishi Supra ? rofl rofl
That thing will be pretty loose with that much power. Good stuff!
Top
User avatar
ukstariont3
I like starions
Posts: 111
Joined: Sun Feb 05, 2006 10:54 pm
Location: UK

my uk widey

Post by ukstariont3 »

heres a few pics of my motor, sure most of you hav prob seen it on this forum before.

Image

Image

Image
mpi still in progress
Image

still loads to do- underside nees some welding, and body work a bit of tidying.
Top
User avatar
hcca
Enthusiast king
Posts: 884
Joined: Thu Jan 08, 2004 9:24 pm
Location: Brisbane
Contact:
Contact hcca

Post by hcca »

bigd wrote: Holy Crap! What are you going to call it - Mitsubishi Supra ? rofl rofl
That thing will be pretty loose with that much power. Good stuff!
Teh Suprastar :)

Just realised what Old Fart was asking q's about.. oops!
Top
User avatar
silo
Enthusiast
Posts: 533
Joined: Fri Oct 21, 2005 2:21 pm
Location: Goulburn,NSW

Post by silo »

hcca wrote:The sad state of affairs:

Image

I'll post a photo of the car itself later - the dust layer is pretty awesome. I'm expecting major work on this very soon!
Mmmm.... 3 liters of 2jz goodness :D Any engine capable of 500+Hp on stock
internals is :drool:

Love ya work hcca :twisted:
Top
User avatar
JPC
almost postwhore
Posts: 1016
Joined: Fri Feb 13, 2004 9:25 pm
Location: Perth, WA

Post by JPC »

silo wrote:Mmmm.... 3 liters of 2jz goodness :D Any engine capable of 500+Hp on stock
internals is :drool:

Love ya work hcca :twisted:
A friend of mine has put a 2JZ GTE into his 1982 Supra and just had it on the dyno - results were 354hp atw :drool:
Starion nutter since 1988...
1983 JA, 1984 JA, 1985 JB (all rego'd, all running :D )
Top
User avatar
Lunacy
nearly postwhore
Posts: 1355
Joined: Fri Jul 22, 2005 3:31 pm
Location: Land of Confusion

Post by Lunacy »

These are some pics of Daniel (Kiwieurospec)s 1985 4ws widebody and of his 1987 Euro Spec.
Image
Image
Image
Image
Image
Top
User avatar
Noddy
Enthusiast
Posts: 603
Joined: Thu May 24, 2007 11:15 pm
Location: Perth

Post by Noddy »

Here are some shots I took today - new wheels and air dam partly fitted (still to be taken off and painted) :D

Image

Image

Image


Engine bay :D

Image
1985 JB - owned from new.
1986 JD - used to own one.......
Top
User avatar
Taras
Big Dorifto
Posts: 80
Joined: Sun Oct 02, 2005 1:38 pm
Location: victoria

Post by Taras »

before, plenty of imperfections.
Image


after, fresh paint, rims and other mods.
Image
cheers taras
finding the outer limits of performance!!! and the cars for sale.
Top
Post Reply

Return to “Show And Go”

Who is online

Users browsing this forum: No registered users and 11 guests