Lunacy's Targa Car Build
Cant get E85 here :(
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
Cheers mate. Seeing your track car done and having taken JAS beast for a spin has given me alot of motivation to get it done.WANTSOM wrote:Coming along great Luna. Keep going, this'll kick some goals for you when all done and bring a smile to your face for sure. Doing awesome work mate :beer
Just comes down to me getting off my backside and doing it now haha. Lucky time is the 1 thing i have plenty of in my line of work :)
Well fuel system is nearly done, just have to put the tank back up and hook up 2 of the braided lines then give her a test for leaks :)
But spent most of today dealing to the sound deadening on the floor under the carpet.
I decided to give the dry ice trick a whirl so got 5kg from BOC this morning and man its good stuff!!!
Leaving it on the flat surfaces for ten min made it crack nicely so i could just pull the pieces off after a couple of hits with a hammer.
Upright part of back seat and all over the trans tunnel were slightly harder as the dry ice didnt wanna stay on there, so i just chucked a heap in an old sock and attached it for 15 min then moved it to the next section.
Most of it came off after a few taps with the hammer, the rest i used a very sharp chisel on.
Anyway enough talk - pics!
Dry ice in the drivers footwell
After a busy arvo - much better
And that was almost 9kg of deadening that came out, with the stuff on the firewall still to go.
WAY easier than me trying to lose nearly 10kg :beer
But spent most of today dealing to the sound deadening on the floor under the carpet.
I decided to give the dry ice trick a whirl so got 5kg from BOC this morning and man its good stuff!!!
Leaving it on the flat surfaces for ten min made it crack nicely so i could just pull the pieces off after a couple of hits with a hammer.
Upright part of back seat and all over the trans tunnel were slightly harder as the dry ice didnt wanna stay on there, so i just chucked a heap in an old sock and attached it for 15 min then moved it to the next section.
Most of it came off after a few taps with the hammer, the rest i used a very sharp chisel on.
Anyway enough talk - pics!
Dry ice in the drivers footwell
After a busy arvo - much better
And that was almost 9kg of deadening that came out, with the stuff on the firewall still to go.
WAY easier than me trying to lose nearly 10kg :beer
Last edited by Lunacy on Mon Jul 09, 2012 2:59 pm, edited 1 time in total.
Gezz thats a good weight saving!! :beer
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
-
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
- Sargeant_Khan
- Enthusiast
- Posts: 673
- Joined: Thu Dec 16, 2004 9:31 pm
- Location: Ipswich
...
nice work man i just went from page 1 to 10 some really inspiring stuff your doing
keep it up
moz
keep it up
moz
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
Who knows, keep the road noise down i guess???WidebodyWoody wrote:what is the point in it in the first place?
I would love to do the doors but thats big $$$$! Il be gutting both of mine once the cage is in anyway so they will weigh alot less than stock.Sargeant_Khan wrote:maybe keep the deadening next time and make some aluminium reinforced fibreglass doors? put me down for a set when you make them. Gotta be 100 kilo's in both the doors EASY.
Bahaha :) Its free to a good home - no hang on it went out in the trash this morn :)TOMSUN wrote:Too funny....
Ship it over to Vulpes... He'd trying add more sound deadining to his Staz
Thanks man, its got totally out of hand really but at least it should go great when its done :beerbigmoz wrote:nice work man i just went from page 1 to 10 some really inspiring stuff your doing
keep it up
moz
Who is online
Users browsing this forum: No registered users and 5 guests