New Member

Display your ride and post power figures, dyno runs, drag and circuit times.
User avatar
BOOST26
Newcomer
Posts: 8
Joined: Sun Oct 15, 2006 10:10 pm
Location: VIC

New Member

Post by BOOST26 »

Hi All,
Just noticed this site. Have had my JA starion for the past 10 years almost and have slowly done it up to stage its at. Still heaps more to do though.
Great to see so many starions are still around.
Just brieflyrunning gear mods: I have put in a modified 2.6 litre with Pajero head, custom manifolding, intercooled and controlled by a Wolf 3D computer. Supra 5 spd, custom clutch, locked diff. Custom suspension.
Dont have any recent dyno runs I can show but she goes pretty well.
Anyway, just thought I'd say, awesome website..
Will download some pics just have to figure out how
2.6 Litre Intercooled Turbo, Wolf 3D
TOMSUN
Group buy King
Posts: 2391
Joined: Fri Sep 10, 2004 10:24 am
Location: Sydney (Liverpool)

Post by TOMSUN »

have you raced it down the quarter mile???

use this like to upload photos... easy :)
http://www.fr33z3.net/upload.php
1985 JB Starion #157
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Welcome aboard :beer
User avatar
spud
Dorifto!
Posts: 61
Joined: Thu Jun 29, 2006 5:56 pm
Location: Sunshine Coast

Post by spud »

Yeah welcome mate.
....Thundercougarfalconbird
User avatar
BOOST26
Newcomer
Posts: 8
Joined: Sun Oct 15, 2006 10:10 pm
Location: VIC

Post by BOOST26 »

Havent raced it down the 1/4 mile but have slaughtered a mates 12.3 sec commodore.
Biggest problem is getting it off the line.
Initial dyno figures during run-in were 238rwhp at 9psi at CB Wilson's in Moorabbin.
Since then, boost is up to 18psi and I have made up a custom intake manifold. The injectors are at their max duty cycle so I have to upgrade that next before I dyno it again.
Will try load some pics tonight.
2.6 Litre Intercooled Turbo, Wolf 3D
TOMSUN
Group buy King
Posts: 2391
Joined: Fri Sep 10, 2004 10:24 am
Location: Sydney (Liverpool)

Post by TOMSUN »

VERY IMPRESSIVE...!!!

Put it down the quarter mile asap...
You could have Australia's quickest Starion... :twisted:


follow this link... :D
http://forums.austarion.com/viewtopic.p ... light=slip
1985 JB Starion #157
User avatar
chunkhead
Mmmmm, I love rice
Posts: 1198
Joined: Thu Sep 30, 2004 2:57 pm
Location: Melbourne

Post by chunkhead »

Yeah, what's the restrictions on this "Quickest Starion" carry on? Does it just have to be in a Starion shell? This car is a 2.6l with pajero bits! Shouldn't qualifications suggest 4G63!?

On a different note, keen to have a look at some pics! :beer
Gone V8 Hunting: Be Back In Seconds!

For Sale:
Xbox/360/Wii Mods Now Available
TOMSUN
Group buy King
Posts: 2391
Joined: Fri Sep 10, 2004 10:24 am
Location: Sydney (Liverpool)

Post by TOMSUN »

chunkhead wrote:Yeah, what's the restrictions on this "Quickest Starion" carry on? Does it just have to be in a Starion shell? This car is a 2.6l with pajero bits! Shouldn't qualifications suggest 4G63!?

On a different note, keen to have a look at some pics! :beer
Might have to split it into 6 categories???
4G63 (2L) SOHC,
4G63/64 (2.4L Stroker) SOHC,
4G63 (2L) DOHC,
4G63/64 (2.4L Stroker) DOHC,
4G63 (2L) DASH SOHC
4G54 (2.6L) SOHC
Any other engine in a Starion (VG30, 350 Chev, SR20DET etc)

And then there is all of the above with NOS... ? Getting complicated... ?
1985 JB Starion #157
User avatar
BOOST26
Newcomer
Posts: 8
Joined: Sun Oct 15, 2006 10:10 pm
Location: VIC

Post by BOOST26 »

Image
Finally worked out this picture thing i think. Hers one of the engine bay
2.6 Litre Intercooled Turbo, Wolf 3D
User avatar
BOOST26
Newcomer
Posts: 8
Joined: Sun Oct 15, 2006 10:10 pm
Location: VIC

Post by BOOST26 »

Image
Image
2.6 Litre Intercooled Turbo, Wolf 3D
User avatar
chunkhead
Mmmmm, I love rice
Posts: 1198
Joined: Thu Sep 30, 2004 2:57 pm
Location: Melbourne

Post by chunkhead »

Where's your pillar vents?
Gone V8 Hunting: Be Back In Seconds!

For Sale:
Xbox/360/Wii Mods Now Available
TOMSUN
Group buy King
Posts: 2391
Joined: Fri Sep 10, 2004 10:24 am
Location: Sydney (Liverpool)

Post by TOMSUN »

I like it... A lot! :D
Now go drag it down the 1/4 :twisted:
1985 JB Starion #157
User avatar
BOOST26
Newcomer
Posts: 8
Joined: Sun Oct 15, 2006 10:10 pm
Location: VIC

Post by BOOST26 »

chunkhead wrote:Where's your pillar vents?
I welded up the pillar vents to make it look a bit cleaner.
Looks different I guess.
Spray job was a quicky and not really happy with the color so I'll re-do it all one day.
2.6 Litre Intercooled Turbo, Wolf 3D
User avatar
BOOST26
Newcomer
Posts: 8
Joined: Sun Oct 15, 2006 10:10 pm
Location: VIC

Post by BOOST26 »

TOMSUN wrote:I like it... A lot! :D
Now go drag it down the 1/4 :twisted:
Thanks
Once I get the injectors sorted and re-tune it, I'll see how it goes down the 1/4.
2.6 Litre Intercooled Turbo, Wolf 3D
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

TOMSUN wrote: Might have to split it into 6 categories???
4G63 (2L) SOHC,
4G63/64 (2.4L Stroker) SOHC,
4G63 (2L) DOHC,
4G63/64 (2.4L Stroker) DOHC,
4G63 (2L) DASH SOHC
4G54 (2.6L) SOHC
Any other engine in a Starion (VG30, 350 Chev, SR20DET etc)

And then there is all of the above with NOS... ? Getting complicated... ?
Rather than have so many categories why not have 2 categories
2L sohc and converted engine, ie different capacity, different number of cams, or other engines. As for Nos indicate whether nos was used in the run or not.
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests