Intercooler 600 x 300 x 76

Post by **TOMSUN** » Fri Aug 19, 2005 2:14 pm

JD_Stazza_Brendan · Post by **JD_Stazza_Brendan** » Fri Aug 19, 2005 2:38 pm

how much of the core will receive good air flow,, looks like only the bottom part gets flow.. or is there more that we cant see in the pics

Post by **TOMSUN** » Fri Aug 19, 2005 2:47 pm

About 100mm (1/3 of the core) will be exposed to direct air below the bumber...

I'm looking to make some sort of lip to help push more air up there but it being such a large intercooler I'm not really worried.

I'd like to drop the car a couple of inches as well so I didn't want it hanging too low.

Starion_Turbo · Post by **Starion_Turbo** » Fri Aug 19, 2005 5:09 pm

You still got room in there, shove a nice big ICE thermofan on the back of the I/C, they only a few centimeters thick and you'll get better engine cooling for radiator and oil cooler as well.

androoz · Post by **androoz** » Tue Sep 06, 2005 6:20 pm

hi tomsun.. very interested in your setup.. planing to get a cooler which is exactly the same size as what you have..

what did u have to relocate? ie. power steering, radiator overflow, battery? from the pics, it doesnt look like you had to relocate the oil cooler..

i plan to mount it exactly the way you have mounted yours..

can i see some pics of the route you made your pipework?

androoz · Post by **androoz** » Tue Sep 06, 2005 7:11 pm

i just noticed that u actually welded it onto your bumperbar! hows that working for you?

Post by **TOMSUN** » Thu Sep 08, 2005 9:20 am

With the brackets welded to the bumper it seems strong enough. I didn't want to cut the chassis rails. It probably could have been mounted a little lower but it will be fine.

Washer bottle and other spray bottle and over flow bottle got the ass. Got to make new ones.

The powersteering was relocated due to the angle the turbo was facing.
Oil cooler(s) stayed where they were.

Had to make a new battery tray and brackets and jam a small battery in that spot on an angle (Bosch NS40) only just fits. Infact the earth terminal touches the body... (Just a bit of extra earth) :)

I'll try to get more pics when it is running. I took the day off work yesterday to wire up the computer. Got about 80% done, just go to do the relays and fuses. :beer

bigmoz · Post by **bigmoz** » Thu Sep 08, 2005 9:51 am

how much did your piping cost??

bigmoz :pimp

Post by **TOMSUN** » Thu Sep 08, 2005 10:36 am

I don't know... I haven't got the bill yet...

bigmoz · Post by **bigmoz** » Thu Sep 08, 2005 10:37 am

:D

bigmoz :pimp

androoz · Post by **androoz** » Thu Sep 08, 2005 8:05 pm

waiting on the pics.. :)

Austarion

Intercooler 600 x 300 x 76

Intercooler 600 x 300 x 76

flow

... how much did your piping cost??

Who is online