1/4 mile times

Display your ride and post power figures, dyno runs, drag and circuit times.
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

1/4 mile times

Post by JD_Stazza_Brendan »

My JD is basicly stock. All i have done is put in is a 3inch mandrel bent exhaust from the last join back. (about a foot or 2 in front of the diff, getting it finished when more money is available), and a bleed valve which i havent played with really. Boost is 8psi.

On monday i ran a 16.9 at about 88mph. This was on street tyres, with about half a tank of fuel, and racing in the QLD afternoon heat. This was only my second time at the drags.
Previous best was a 18.1 with bad gear changes and my ignition timing out by almost 7 degrees.

I didnt get to better my 16.9 as on the start of my second pass the alternator died, and as such the rest of the car died.

Is a 16.9 alright ?????, i heard they ran 16.7- 16.8 standard
User avatar
SpidersWeb
postwhore!
Posts: 1984
Joined: Wed Jan 28, 2004 2:29 am
Location: Wellington, NZ

Post by SpidersWeb »

Actually I thought it was 16.9 from factory. Could be wrong tho.
1997 Mitsubishi Lancer Evolution IV 4G63BT
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
decoy
Let Me Out!
Posts: 4424
Joined: Tue Sep 09, 2003 3:03 pm
Location: Far from home
Contact:

Post by decoy »

i remember reading 15.5 back in the old day, there were 2 factory figures floating around and that was the lower of the two.
_
_________________
Fuel
Enthusiast
Posts: 501
Joined: Sat Jan 10, 2004 7:48 pm
Location: Melbourne

Post by Fuel »

JA/JB 16.2

JD 16.5 (i think)
INP51
I like starions more
Posts: 157
Joined: Sat Jul 10, 2004 6:03 pm
Location: Brisbane

Post by INP51 »

My JB with FMIC 14psi and hi flowed turbo did 15.03 at 91mph with a serious miss at the top of 2nd and 3rd shouldv gone 14's but didnt

next time out im after low 12's

EVO 3 motor
GT3037 500hp turbo (external gate yummm)
FMIC
3" zorst
NX Hitman EFI nitrous kit (best kits on the market shit all over NOS and ZEX) - 75hp atw hit
HKS 1.2 mm stainless head gasket (8.6:1)
profec B Spec II Boost controller (18psi hi, 13low)
new rings gaskets bearings std pistons
custom plenum n stainless exhaust manifold
autronic sm2 computer (anti lag, launch control, trac control, flat shift etc.)
bosch 550cc injectors
should make 350hp atw then gas will make it 425hp atm
cant wait to get her goin
Why drink n drive when u can drift n slide ?
User avatar
davidbek95
I've been here before
Posts: 249
Joined: Thu Jan 08, 2004 7:59 pm
Location: beautiful QLD (mackay)

inp51

Post by davidbek95 »

inp51,does your father own a work shop near the gabba.
regards david
INP51
I like starions more
Posts: 157
Joined: Sat Jul 10, 2004 6:03 pm
Location: Brisbane

Post by INP51 »

Sure does which one is urs ? the white JB with the GT28 ? or did u buy his JA racecar ?
either way u got a set of 3.9's for LSD ??? i want em i want em hahaha
Why drink n drive when u can drift n slide ?
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

more QLD people. Cool
User avatar
SIRIUS
Enthusiast
Posts: 587
Joined: Sun Jan 11, 2004 12:19 pm
Location: adelaide

Post by SIRIUS »

14.827 @ 93. something mph... spewing coz had a standard clutch.. was slipping 1st into 2nd n 2nd into 3rd... :cry: maybe would do a low 14.7 or a high 14.6... but reckon ill skip that an jump to a low 14 or a high 13 once i put multi point on when i get back to adelaide... :drool:
Valiant VJ E55 Charger
Valiant VK E57 Wagon
Valiant VF VIP 318 Fireball
Valiant VF-X hemi
Mitsubishi JA Starion

---------- THE MOPAR MAN ----------
User avatar
Powerslave
Mine is bigger than yours
Posts: 282
Joined: Sun Jan 18, 2004 1:12 am
Location: Brisbane , Queensland

Re: inp51

Post by Powerslave »

davidbek95 wrote:inp51,does your father own a work shop near the gabba.
regards david
So , you're the one who owns the white JB !!! I work around the corner and often wondered what the go was with your Staz. Have'nt seen it around for a while though.
User avatar
davidbek95
I've been here before
Posts: 249
Joined: Thu Jan 08, 2004 7:59 pm
Location: beautiful QLD (mackay)

inp51

Post by davidbek95 »

INP51 I am flying into brisbane on thursday morning 14/04/05,i spoke to your father as i am going to visit him at his bussiness either thursday or friday,as i have alot time for your father,as i bought alot things of him in the past ,he modified my standard computer,bought a 350hp bb turbo of him as i am selling plus a manifold with adaptor and with dump pipe,bought a autronic ecu and the list goes on.TO ALL YOU STARION owners out there, inp51 father has the been around starion and seen some of work.especially the the green 260 z maybe a 240z with the gtr motor in it.No i wished i did buy his race car for all the good gear in it ,i think your father said the guy bought the race car lives out at a place called Dysart,a mining town west of mackay.
regards david
User avatar
Powerslave
Mine is bigger than yours
Posts: 282
Joined: Sun Jan 18, 2004 1:12 am
Location: Brisbane , Queensland

Post by Powerslave »

Yes , I've seen that green nissan , it goes , but not like the twin turbo 351 mustang around the corner from the taxi rank at wooloongabba. Leaves nice rooster-tails of smoke down the straight at QR !!!
jimbo_ak47
Newcomer
Posts: 9
Joined: Sun Apr 11, 2004 7:01 pm
Location: Tasmania

Post by jimbo_ak47 »

well im sitting at skool rite now lookin at a stats report from an old skool magazine i have (wen stazza's were $19,950!) and it says

test conditions.
dry, cool, two persons, fuel- super!.

this baby ran a flat 16.2 from the showroom so there's some solid proof.
83' factory black JA
Chris 83JA
almost postwhore
Posts: 1015
Joined: Sat Jan 10, 2004 12:02 pm
Location: Ballarat, Victoria, Australia
Contact:

Post by Chris 83JA »

jimbo_ak47 wrote:well im sitting at skool rite now lookin at a stats report from an old skool magazine i have (wen stazza's were $19,950!) and it says

test conditions.
dry, cool, two persons, fuel- super!.

this baby ran a flat 16.2 from the showroom so there's some solid proof.
scan and upload NOW!

...please :)
User avatar
jono
I've been here before
Posts: 203
Joined: Sun Feb 15, 2004 12:08 pm

Post by jono »

sounds a bit slow , how was the launch and gear shifts
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 5 guests