My starion 2.0t widebody "candy apple red paint" f

Display your ride and post power figures, dyno runs, drag and circuit times.
TommiCrazy
Big Dorifto
Posts: 95
Joined: Thu Mar 29, 2007 1:29 am
Location: Poland & United Kingdom
Contact:

Post by TommiCrazy »

if anyone could confirm this for me if this is right

1) european starion ECU is not gonna let more bost that 0,5?
- conquest ecu is more "friendly " and it will let bigger bost from turbo?
if yes, can i swap ecu from conquest just plug n play ?
Galant 2.0 E33A
Starion 2.0T Wide body
Galant 2.0T E39A 4WD
GTO 3.0 V6 Twin Turbo
24 times winner at the british tattoo festivals

www.tommicrazy.com
popup
Mine is bigger than yours
Posts: 252
Joined: Thu Jun 07, 2012 11:14 pm
Location: UK

Post by popup »

From what I understand there were quite a lot of different part numbers for ECU, perhaps 8-10. I have no idea what the difference, would be nice to know. I think some vary by type of connector too.
1986 UK 2 litre intercooled narrow body
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

TommiCrazy wrote:if anyone could confirm this for me if this is right

1) european starion ECU is not gonna let more bost that 0,5?
- conquest ecu is more "friendly " and it will let bigger bost from turbo?
if yes, can i swap ecu from just plug n play ?
The european ecu I'm not too sure if it will boost cut that early, 87 2.0 aussie starion ecu's will go to .9 bar before cutting. 2.6 ecu wil definitely not work on a 2.0. Your car is 2.0 isn't it?
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
starionc
I love starions
Posts: 479
Joined: Wed Sep 14, 2005 11:50 am
Location: sydney
Contact:

Post by starionc »

TommiCrazy wrote:
there is no power over 5k.

every things go nice until 5k, and there is a big turbulences on the dyno scale.
I had this problem some years ago in my JB. Only it was at 4K
We put it on the dyno and found that it was over fueling (too rich) from 4K and up. Made less power after 4K
I sold the car, the new owner put a roller bearing turbo on it. Had the factory ecu remapped and made 190Kw at the wheels! So he told me. But then he cracked one of the rings and that was the last I heard from him.
He lived in Townsville at the time, And it's not Phil. (Tri26t)
How many Starions can one man drive!!

Check out my website: www.aboutstumpgrinding.com.au
TommiCrazy
Big Dorifto
Posts: 95
Joined: Thu Mar 29, 2007 1:29 am
Location: Poland & United Kingdom
Contact:

Post by TommiCrazy »

that sounds about right, because people are commenting that they can smell from exhaust that is to rich fuel mix , so now i know that might be a first sign of turbo fault...

i still have dedicated new HKS turbo , but it is dedicated to pumps 380 hp and i still have stock engine, i was wondering if this gonna be ok to drive with smaller bost. but then it might be terrible lag :/

about my bost cut.. my boost gauge on full power is showing that i have less than 0,5 of kg/cm2....


and yes, my engine is 2.0 , thanks for that info about 2,6 ecu.
Galant 2.0 E33A
Starion 2.0T Wide body
Galant 2.0T E39A 4WD
GTO 3.0 V6 Twin Turbo
24 times winner at the british tattoo festivals

www.tommicrazy.com
TommiCrazy
Big Dorifto
Posts: 95
Joined: Thu Mar 29, 2007 1:29 am
Location: Poland & United Kingdom
Contact:

Post by TommiCrazy »

ps. pop up lights works fine, they go down every time i want :) , i just had loads of photos with "open eyes" :) cause i think it looks more agressive :)

Image
Galant 2.0 E33A
Starion 2.0T Wide body
Galant 2.0T E39A 4WD
GTO 3.0 V6 Twin Turbo
24 times winner at the british tattoo festivals

www.tommicrazy.com
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

That turbo would be a 17C wouldnt it? Yeah that should be ok maybe a little laggier than your stock turbo but i doubt it would be as laggy as our TC06's on a 2.0...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
TommiCrazy
Big Dorifto
Posts: 95
Joined: Thu Mar 29, 2007 1:29 am
Location: Poland & United Kingdom
Contact:

Post by TommiCrazy »

yes, if i remember it was described 17c, i hope its good one :))

also
my ignition distributor unit just died for good, any one have any idea where i can bought new? in american ebay there are only conquest 2.6 distributors, and in EU ebay there are only caps or rotors :/
Galant 2.0 E33A
Starion 2.0T Wide body
Galant 2.0T E39A 4WD
GTO 3.0 V6 Twin Turbo
24 times winner at the british tattoo festivals

www.tommicrazy.com
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

Post a pic of the distributor & plug Tommi, I have a few types here :)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
TommiCrazy
Big Dorifto
Posts: 95
Joined: Thu Mar 29, 2007 1:29 am
Location: Poland & United Kingdom
Contact:

Post by TommiCrazy »

my car is in poland , but i can ask my friend to take it off for me and i will show full picture , at the moment i have only picture when i was trying to read unit numbers, and if i can see them right, it says : T3T63179

Image
Galant 2.0 E33A
Starion 2.0T Wide body
Galant 2.0T E39A 4WD
GTO 3.0 V6 Twin Turbo
24 times winner at the british tattoo festivals

www.tommicrazy.com
popup
Mine is bigger than yours
Posts: 252
Joined: Thu Jun 07, 2012 11:14 pm
Location: UK

Post by popup »

I think that is an MD082010. You should be able to get the pickup bit inside, if that is what has broken, I'd imagine that part is the same on many Mitsubishi distributors. My book says it an HEI type II Igntion system
1986 UK 2 litre intercooled narrow body
TommiCrazy
Big Dorifto
Posts: 95
Joined: Thu Mar 29, 2007 1:29 am
Location: Poland & United Kingdom
Contact:

Post by TommiCrazy »

better image sended from my friend
if that can help

Image
Galant 2.0 E33A
Starion 2.0T Wide body
Galant 2.0T E39A 4WD
GTO 3.0 V6 Twin Turbo
24 times winner at the british tattoo festivals

www.tommicrazy.com
popup
Mine is bigger than yours
Posts: 252
Joined: Thu Jun 07, 2012 11:14 pm
Location: UK

Post by popup »

Tommi, I just took my distributor apart and it has the same part number on it as yours. The coil has two spade connectors inside. I measured mine as about 1kohm and if you then place your meter onto volt reading and spin the shaft by hand you can see it producing a small voltage.
1986 UK 2 litre intercooled narrow body
TommiCrazy
Big Dorifto
Posts: 95
Joined: Thu Mar 29, 2007 1:29 am
Location: Poland & United Kingdom
Contact:

Post by TommiCrazy »

thanks Popup :) i think that my friend who keep eye on my car said that the is some mechanical damage inside distributor, but if this number is the same , now it might be prove, that curnent engine in my 89 starion was swapped from narrow body 2.0 starion, beacuse orginally engine supposed to be 2,6.

just curious, have you got a picture of your enigine bay ?

ps. i decide to buy mitsubishi GTO today, but iam gonna keep starion as well :)
Galant 2.0 E33A
Starion 2.0T Wide body
Galant 2.0T E39A 4WD
GTO 3.0 V6 Twin Turbo
24 times winner at the british tattoo festivals

www.tommicrazy.com
popup
Mine is bigger than yours
Posts: 252
Joined: Thu Jun 07, 2012 11:14 pm
Location: UK

Post by popup »

Have you got headlight washers? From what I remember they were fitted to 2.0litres but not 2.6litres, but maybe that is only true for some regions of the world.

Here is my engine bay, horrible I know but it is being done/tidied.
Image

If you need photos of the dizzy I took a few of that but I need to get them off the camera. There really isn't much in the dizzy, the only difference between models (I think!) is the curves for the vacuum advance and weights/springs for mechanical advance. So depending on whats wrong you may be able to swap bits from any mitsu dizzy to make it correct for your engine.

ps, I went in a GTO many years ago that had a couple of bleed valves on boosting each turbo to about 25psi. It was silly fast, but engine blew up very quickly ( no surprise) and the thing was a nightmare to work on.
1986 UK 2 litre intercooled narrow body
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests