Hi Guys,
I need to remove the roof lining from one of my cars and install it into another one. Any idea how I go about it? I gather that the roof lining will be held in with the interior plugs like on the door trims?
If anyone has done this before it would be a great help if you could give me some guidance as to how to most easily do this.
Thanks guys
How to remove roof lining?
- fr335tyl3r
- I'm Sorta Reformed!
- Posts: 2073
- Joined: Tue Apr 13, 2004 3:07 am
- Location: Baulkham Hills, NSW
rear section slides out, pull it backwards iirc. Front section is held in by screws, 2 in the middle of the doors, and the other ones are part of the interior light/mirror setup again iirc.
basically, once you get the rear section off you should be able to see where its being held on as it will flop around where its not. I cant remember if you have to take anything off to get to the first 2 screws but you will have to take the entire interior light section off.
basically, once you get the rear section off you should be able to see where its being held on as it will flop around where its not. I cant remember if you have to take anything off to get to the first 2 screws but you will have to take the entire interior light section off.
Who is online
Users browsing this forum: No registered users and 5 guests