Blue fuzzy shit!

Technical questions and ideas regarding how your Starion looks inside and out, bodykits to stereos.
Post Reply
FST4RD
almost postwhore
Posts: 1223
Joined: Sat Dec 09, 2006 10:22 am
Location: Christchurch

Blue fuzzy shit!

Post by FST4RD »

Just about finished stripping the interior. Removed the roof lining yesterday and underneath is some blue fuzzy stuff.
Anyone have any idea how to get it off the metal roof without damaging the paint?
Some bits came off easy, but it seems some other bits are glued.
Sold - 1987 Mitsubishi Starion GSR V DASH
Current - 1995 Subaru Legacy TT SW
- 1983 Mitsubishi Starion
JJH
Enthusiast
Posts: 651
Joined: Mon Oct 18, 2004 10:09 am
Location: Melbourne - East

Post by JJH »

Massive PITA!
Go to your local hardware store and get the strongest glue remover, some scrapers & a drop sheet (to catch all the shit you scrape off the roof).
Apply liberally, wait the indicated time and then scrape until every muscle in your body aches :glare:
Repeat as many times as it takes to turn the glue into a very faint white stain on the roof.
Took me a couple of weekends & a couple of trips to the Chiropractor to get the job done. :cry:
Good luck!
User avatar
Lunacy
nearly postwhore
Posts: 1355
Joined: Fri Jul 22, 2005 3:31 pm
Location: Land of Confusion

Post by Lunacy »

Without damaging the paint? Nil options haha.
I took it off with a wirebrush on the end of a drill. Prat of a job!
Image
FST4RD
almost postwhore
Posts: 1223
Joined: Sat Dec 09, 2006 10:22 am
Location: Christchurch

Post by FST4RD »

Bugger! I was hoping for an easy answer!
I really didn't want the hassle of repainting anything.
Well Im going to buy a can of por15, so might have to fix up the bare metal with that.

Just a thought. What about a heatgun and a scraper?
Sold - 1987 Mitsubishi Starion GSR V DASH
Current - 1995 Subaru Legacy TT SW
- 1983 Mitsubishi Starion
User avatar
panda
Enthusiast
Posts: 680
Joined: Fri Apr 18, 2008 2:56 pm
Location: Mount Gambier, South Australia

Post by panda »

FST4RD wrote: Just a thought. What about a heatgun and a scraper?
Just don't use a naked flame to burn it off. It all catches fire real quick. I found out the hard way. Now I'm back to scraping a bit off each week-end. As JJH said, it doesn't take long till your back hurts.
Dreams have no limits.

1982 JA - Ex Enthuzed
1982 JA - For Sale - pending
1983 JA - Ex Auto-cross car - being parted out
1983 JA - Being parted out
1984 JA - Rolling shell - For Sale
1985 JB - Rally car project
1985 JB - Autocross car
1985 JB - Week-end cruiser
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

Yeh I looked doing this! I ended up just ripping as much as I could off by hand and just leaving the rest. Might try the glue remover / stripper idea though hmmm fun
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
FST4RD
almost postwhore
Posts: 1223
Joined: Sat Dec 09, 2006 10:22 am
Location: Christchurch

Post by FST4RD »

Back isn't to bad, i just reclined the drivers seat and went for gold. A lot of it came off on it's own. Going to buy one of those sticker scraper things with the blade in the end, i reckon that will take the rest off.

On a side note there was a bit of moisture under the roof lining, surprised there was no rust!
Sold - 1987 Mitsubishi Starion GSR V DASH
Current - 1995 Subaru Legacy TT SW
- 1983 Mitsubishi Starion
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest