Austarion

Hey is their any one in NZ that's got a spare exhaust manifold :D 4 sale and in good nick....My current one is stuffed, looks like been over heated and bent the divder things inside which can't be corrected :D

are you nz or aus.im in nz.can prob score 1.

I dont have one for sale but when you say "divider thing" is it a pronounced as in big coz if it is then I think you just stuffed a split pulse version.

These are available new in Australia from a place in Melbourne at about AUD$600 + GST. If you're in NZ then you have to add exchange rate + shipping to that.

Split pulses second hand a like rocking horse poo.

wherethe turbo bolts on, the out side cylinders are seperate from the inside ones until it hits the hole then it becomes one, I'll do at picture of it and Yes I Live in NZ Hamilton

here's a pic of it, you can't tell inthe pic but it's also cracked and the piece in the centre should be straight which can't be bent back DOH!

[img]http://groups.msn.com/_Secure/0RQDyArMT ... 912235[img][/img]

Can you get the centre section removed?

Yeah it partly can be, but the xhaust place said it may cause problems becasue that part travels right thru and round to the exhaust ports. It's not designed to just have the cetre part just cut out

A standard exhaust manifold doesn't have a centre section at all.

why dont you make a custom one? they arent too hard to knock up..

Jon

tried that no one around my area can do one, and if anyone can it's going cost alot money (too what I have heard) DOH! :roll:

hey dudes, got hold of a brand new manifold :) Mitsubishi motors are getting one from japan 4 me 4 about 350+ for me so I'm pretty pleased with that price..

Bad time to yell you that the last un-cracked exhaust manifold i bought was for $20 then? :( they are very very very rare in good nick these days tho. Good shit on getting mitsy to get you one, who'd a thunk it!

ProZac

Where! Where! Where! :drool:
Any more
Mine is reconditioned (welded) and the spare one in my spares box is cracked.

why is that called split pulse? it is nothing like any of the split pulse setups I have built. you need a split turbo for it to work. granted those might flow better than one without the webbing, but I am fairly sure they arnt 'split-pulse'. anyway, there worth something? I have one to fit a VR4, 1 to fit a cordia and 3 to fit starions. but the cordia and starion ones are currently under 3tone of scrap metal (bottom of the scrap bin) but i might try to rescue them when the bin gets emptied if i am around.

Doh! oh there's the breaks.... oh well it's brand new so it's all good :D