Austarion

Looking for something that is in good condition, and not leaking if possible.

Thanks,

Marc

there is no such thing they are usally all ratshit :D

That's a bit harsh... mine works fine since the minor rebuild!

they all leak and after a lot of pissin-round
I just wnet to a seal shop with the ECI-(TBI) and
got every O-Ring in the thing and got new ones
for about $10.00 bucks, although I did have to
put teflon tape round the D-rubber on the injector
wires where they go through the TBI hat, CURED

Cheers:Phil.

The one on my JA works perfectly. Don't know what you are all talking about. My old JA's was fine too.

my rebuild failed ... i think its the injectors themselves leaking hence forcing feul out wherever it can. silicon has stemmed it ( kinda ) .. tax time should see an mpi swap :) the best fix for it :beer

tri26t wrote:...although I did have to
put teflon tape round the D-rubber on the injector
wires where they go through the TBI hat, CURED
Cheers:Phil.

That's interesting, since you shouldn't be getting fuel in there anyway, unless the injectors are leaking (either external or internal o-rings) :?