Austarion

I am selling 16" Sapang wheels. 4 x 114.3. $460 for the set.

http://s32.photobucket.com/albums/d13/G ... h=imgAnch1

ur picture not workin

heya
with tyres?
where bouts are you, you sure they fit stazza? no spaces needed or anything?

They are 4 x 114.3. I am not sure about the offset as to whether they will fit a Starion. I am in Wagga NSW. The front tyres are in ok nick but the rears for some strange reason are a bit baldish.

The distance from where the hub sits against the rim and the back of the rim is approx 130mm. I also have a set of 3mm spacers for $15. I had the spacers on the front to clear a set of 4 piston calipers I have on the car.

hey so they will go stright on the starion? also would you ship/send to melb? how much in total am i looking at? are they in good nick... any gutter damage?

Nothing nasty in the way of gutter damage. The rear tyres are shagged, but the frints aren't too bad. Can freight to Melbourne but would probably cost $100 on a pallet for freight.

so would they bolt on or do i need spacers with them? if so do you have the size i will need. i am looking at about $560 then...

I have not tried them on a Starion. They are a 16 x 7" rim with about 130mm from the hub to the back of the rim. You may not need spacers at all, I had to use them on my Silvia because of the 4 piston calipers I had on the front.

Hi, I take it that it's for 4 rims not 5. Im about to do a brake upgrade which requires 16" rims to be able to fit over the calipers/rotor and I would like my spair to be a 16" as well.
Cheers.

Yeah sorry dude, only 4 rims.