fs: clearing out shed of ja staz stuff
Posted: Wed Jul 26, 2006 12:36 pm
Ok i have a heap of starion stuff that i no longer need.
Ok here's a list of what i have.
A complete inlet manifold and throttle body with injectors. Left over from multipoint converion. The injectors are pretty much brand new. The mate i bought the engine setup from bought the injectors from japan for $1200. This was before he found out about multioint being so cheap. Willing to seperate. $220
Starion oil cooler $50
2 Cut air boxes $15 each
2 Air flow meters $25 each
3 inlet manifolds $20 each
ja cross over pipe $20
Crossover pipe from i think dash 12 valve setup with Bosch BOV attached.
Don't know how well the bov works but apparently it leaks a little so there is the 1 way fitting over it to fix that problem. $25
2 throttle bodys. One cracked so only good for parts and one fine but missing bits $25 for the pair
Various JA computers and sensors. Reasonable offers considered
2 Ja wiring Looms as shown some broken wires and plugs missing on some but should be able to make a complete loom if you need to Make an offer
As far as i know all the computers are fine. As far as i know were working when removed. Went aftermarket computer option.
Also i have 3x l300 throttle bodys here if anyone would want them. Two with TPS on them and one with idle control on it $30 for the lot
[/img]
Ok here's a list of what i have.
A complete inlet manifold and throttle body with injectors. Left over from multipoint converion. The injectors are pretty much brand new. The mate i bought the engine setup from bought the injectors from japan for $1200. This was before he found out about multioint being so cheap. Willing to seperate. $220
Starion oil cooler $50
2 Cut air boxes $15 each
2 Air flow meters $25 each
3 inlet manifolds $20 each
ja cross over pipe $20
Crossover pipe from i think dash 12 valve setup with Bosch BOV attached.
Don't know how well the bov works but apparently it leaks a little so there is the 1 way fitting over it to fix that problem. $25
2 throttle bodys. One cracked so only good for parts and one fine but missing bits $25 for the pair
Various JA computers and sensors. Reasonable offers considered
2 Ja wiring Looms as shown some broken wires and plugs missing on some but should be able to make a complete loom if you need to Make an offer
As far as i know all the computers are fine. As far as i know were working when removed. Went aftermarket computer option.
Also i have 3x l300 throttle bodys here if anyone would want them. Two with TPS on them and one with idle control on it $30 for the lot
[/img]