Austarion

Hello/G'day guys

I have been away for some time on bussiness so I have not been on the boards much ( My appologies )

But I wanted to state again for those of you who do not know me that I can provide you with LSD's, HD CV's, Torque Tubes, Short Shifters, struts, wheels, ect and just about anything you may need for your Staz from the US. ( Body parts are available BUT shipping is NOT cheap and rarely worth it unless you are rich or just MUST have them)

The LSDs and all other parts I offer are USED UNITS the LSD's come standard with 3:55 gears BUT I can send it with either 3:90's, 4:22's or 4:625's gear ratios, (At additional cost of corse) The 4:22's are very rare and thus harder to locate, the 3:90's are the best ones to locate in better shape.

Partial parts list and prices:
NOTE Check the currency converter bellow for a more up to date currency exchange rate. ALSO NOTE that the currency exchange rate provided is the LOWEST possible and PAY-PAL is about 5% higher than any given quote from the link in my signature.

- LSD is USD$300.00 / AUD$395.00 (Aprox.)
- 3:90 or 4:625 gears USD$120.00 / AUD$160.00 (Aprox.)
- Torque Tube USD$90.00 / UD$120.00 (Aprox.)
- Shipping for all of the above USD$140.00 / AUD$185.00 (Aprox.)

TOTAL with 3:55 gears USD$560.00 / AUD$740.00 ( Shipped to your door )
TOTAL with 3:90 or 4:625 gears USD$680.00 / AUD$860.00 ( Shipped to your door )

And YES the LSD is from the US and it will take about 6 to 8 weeks for delivery, AND if any other gear other than the 3:55 are ordered you WILL need to have the pinnion proffesionally PRESSED in by a machine shop.

ANY Question please dont hessitate to ask.
Thanks / Cheers
Oscar

oscardortega@yahoo.com

$860 shipped for a 3.90 LSD. Thats a damn good deal. If I didn't already have one, I'd buy one.

Cookiemonster wrote:$860 shipped for a 3.90 LSD. Thats a damn good deal. If I didn't already have one, I'd buy one.

Cookie

The deal get better as the US Dollar drops yet again !
I dont make more but you guys get more for less.

And BTW I have replied to your PM regarding your steering part just waiting on some info from you. Look forward to helping you locate those bits for you.

Cheers
Oscar

how much in AU for a short shifter to the door just out of interest? p.s im on the gold coast QLD

jameshey_1 wrote:how much in AU for a short shifter to the door just out of interest? p.s im on the gold coast QLD

Hello
The Short Shifter ( ONLY ONE left ) is USD$140.00 + USD$15.00 for Air mail ( AUD$206,00 TOTAL ) to your door.

BTW Where is and what is "QLD" ? Sorry for the ignorance mates =)
I am not too familiar with Australia but if in Oz thats shipping cost.

Thanks
Oscar
E-mail for faster replies ( oscardortega@yahoo.com )

QLD = Queensland. A State of Australia.. north of New South Wales.

Oscar-the-Grouch wrote:The Short Shifter ( ONLY ONE left ) is USD$140.00 + USD$15.00 for Air mail ( AUD$206,00 TOTAL ) to your door.

Hey Oscar, the US dollar goes down so 140+15=206???

Alspos wrote:

Oscar-the-Grouch wrote:The Short Shifter ( ONLY ONE left ) is USD$140.00 + USD$15.00 for Air mail ( AUD$206,00 TOTAL ) to your door.

Hey Oscar, the US dollar goes down so 140+15=206???

$USD140 + $USD15 = $USD155 = $AUD206 (assuming $AUD1 = $USD0.75)

Oops, didn't read the AUD bit

And why the fuck aren't you at work Cookie?????

Alspos wrote:And why the fuck aren't you at work Cookie?????

Sick.






*cough*

Hehe...is this short shift kit worth it? How much shorter is the throw going to be?

Im meant to be in a lecture...hehe stupid wireless internet

You can try making your own if you like Freestyler..

http://austarion.com/forums/viewtopic.php?t=426

wat do you offer in the way of wheels??

cheers

fr335tyl3r wrote:Hehe...is this short shift kit worth it? How much shorter is the throw going to be?

Im meant to be in a lecture...hehe stupid wireless internet

Some members do make thir own with success.
These short shifters reduce the throw by 45% of the Original. This shifter remains at the original legth and higth the shortness is in the spacer block.

GUYS I DONT MAKE THESE NOR I AM A SUPPOLIER FOR THE MANUFACTURER. I HAD THREE THAT I BOUGHT FOR OTHER US MEMNERS THAT NEVER PAID ME FOR THEM SO I KEPT THEM TILL SOMEONE NEEDED THEM.

green|sigma wrote: Posted: Tue Aug 09, 2005 1:55 pm    Post subject:

wat do you offer in the way of wheels??

cheers

i DO NOT offer narrowbody Starion wheels as they are not very popular here in the US and are hard to find in GOOD shape, but I can offer the widebody wheels in the smaller 7" fronts and 8" rears and also the RARE 8" fronts and 9" rears. ON AVAILABILITY ONLY as I have two Oz members allready in line for the wider wheels and I have still to locate a good set.

But ALL the wheels I ship to you guys are FULLY pollished and BETTER than new when you get them. See picture bellow of one I shipped not too long ago.





The narrow wheels ( 7" & 8" ) are USD$500.00 + post
The wider Wheels ( 8" & 9" ) are USD$650.00 + Post (If I can find any ) or more if the owner wants more for them.

Hey Cookie...
I hope you are feeling better.... :D
And I think Cookie is not just SICK but SICK and Tired !

used that excuse many time to call in sick at work !
By the way thanks for the MATH lesson... :beer

Later guys
Oscar

Hi there Oscar-the-Grouch, just regarding that short shifter....can you still get them? I live in Brisbane QLD Australia and i see the price you have there to the door is..$206.00..?? And how would i get payment to you?

Thanks
Sonic