WTB. Decent TC06 PARTS
WTB. Decent TC06 PARTS
Here I am again, looking for a half decent turbo...so dont sell me crud!
i've got tw0 tc-06s non-working one fully Seized the other is slightly seized, BUT both have cordia exhaust housing, not really that much of a problem you just have to cut, rotate and weld your dump pipe about a cm,every thing else mounts up. one has the cordia comp housing and the other ones comp housing has been polished heres a pic
note no wastegate mount holes i didn't notice this till i got it, nor did i know it was a cordia exhaust housing till i went to mount the dump pipe:glare: .
heres a pic of the other one
make an offer
the only thing is i'm in broome and the parts are with my car in derby so won't be able to get them for about 2 weeks.
if you don't find any local parts you can come back to me.
note no wastegate mount holes i didn't notice this till i got it, nor did i know it was a cordia exhaust housing till i went to mount the dump pipe:glare: .
heres a pic of the other one
make an offer
the only thing is i'm in broome and the parts are with my car in derby so won't be able to get them for about 2 weeks.
if you don't find any local parts you can come back to me.
I'm Back
...
hey flav i have one that a pulled off my car and replaced with a second hand one the seals are gone and the shaft has a fair amount of play but if in need im only in ivanhoe
bigmoz :pimp
bigmoz :pimp
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
-
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
http://firesport.ipspace.com/?section=i ... w&id=20373
you may want to check this out but its a bit pricey
as for my turbos one doesn't move at all and the other moves but not smoothly.
$150 there both yours inculding postage.
you may want to check this out but its a bit pricey
as for my turbos one doesn't move at all and the other moves but not smoothly.
$150 there both yours inculding postage.
Last edited by gotrice? on Thu May 26, 2005 2:58 pm, edited 1 time in total.
I'm Back
Thanks but i dont need any TC05 Units. Im interested in the TC06 units that you have Gotrice, but if the impellors have hit the housing they are trash, or if the exhaust impellor and shaft are worn they are also no good. I would like to dismantle and inspect prior to any payment as i have a box full of turbos that are wheel chocks and have paid good money for.
-
- OoOhhh BabY
- Posts: 69
- Joined: Fri Mar 05, 2004 10:38 am
- Location: gold coast
tc04
got a td06 hybred water cooled pefect used off a car i bought 4 shell low ks .pm ????
...
yeah man the big building is near my house but i have been to your house b4 its only 10 mins away
bigmoz :pimp
bigmoz :pimp
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
Who is online
Users browsing this forum: No registered users and 60 guests