FS: TurboXS boost controller - SOLD!
Posted: Mon Apr 25, 2005 7:14 pm
TurboXS high performance boost controller for sale. Brand new they cost at least US$120 so I'm asking $70. If you think thats a gouge make me a reasonable offer.
Some googled information below.
"Designed for those who want the ability to radically increase their boost levels 1 to 30 psi above stock, but don’t want to pay hundreds of dollars to do it. The TurboXS High Performance Boost Controller (HPBC) is the right choice for simple, accurate and reliable high level boost control. The HPBC has two (2) boost control mechanisms built into it. One is a ball and spring mechanism for large and coarse boost pressure increases and the other is a bleed valve system for precise boost pressure setting. The ball and spring mechanism keeps pressure out of the wastegate until the preset boost level is reached, significantly reducing wastegate creep and providing quicker turbo spool up. Boost is adjusted with the simple turn of the screws using a 2mm hex key.
Installs as easily as our Standard Boost Controller: Simply cut the waste gate pressure hose and insert the supply pressure hose onto the brass nipple of the boost controller. Insert the waste gate supply hose onto the blue colored nipple. Secure the hoses with hose clamps."
http://www.racetep.com/xshpbc.html
http://www.prostreetonline.com/buy/turb ... ontroller/
http://www.lightningmotorsports.com/turboxs.html
Some googled information below.
"Designed for those who want the ability to radically increase their boost levels 1 to 30 psi above stock, but don’t want to pay hundreds of dollars to do it. The TurboXS High Performance Boost Controller (HPBC) is the right choice for simple, accurate and reliable high level boost control. The HPBC has two (2) boost control mechanisms built into it. One is a ball and spring mechanism for large and coarse boost pressure increases and the other is a bleed valve system for precise boost pressure setting. The ball and spring mechanism keeps pressure out of the wastegate until the preset boost level is reached, significantly reducing wastegate creep and providing quicker turbo spool up. Boost is adjusted with the simple turn of the screws using a 2mm hex key.
Installs as easily as our Standard Boost Controller: Simply cut the waste gate pressure hose and insert the supply pressure hose onto the brass nipple of the boost controller. Insert the waste gate supply hose onto the blue colored nipple. Secure the hoses with hose clamps."
http://www.racetep.com/xshpbc.html
http://www.prostreetonline.com/buy/turb ... ontroller/
http://www.lightningmotorsports.com/turboxs.html
