Austarion

JA ecu, wiring loom, complete inlet manifold. SOLD.
see pic & possible info at;http://austarion.com/forums/viewtopic.php?t=3084

2.5" press bent dump pipe with seperate wastegate line. SOLD
Smallish intercooler (maybe VR4??) $10. (see pic below)

Airflow meter with K&N filter $30.

JA (or import) dizzy with working diaphragm. SOLD


PM me or ring 0415 559 072

Damn, wish you were in Perth.

Any chance you can post up a pic of the whole dump pipe? Also, another angle on the where the wastegate feed comes off would be appreciated. Was this a decent upgrade?

Cheers
Brendan

Oh, and another question, would anyone be able to tell if the dizzy would fit my car (see sig for link). I'm pretty sure the vacuum advance is stuff on mine (99% according to mech.) so this would be a handy pickup.

Cheers
Brendan

You can get a vac advance unit from repco or bursons for about $20

Brendan, you can also fit the vac advance unit without removing the dizzy.

sillbeer wrote:Damn, wish you were in Perth.

Any chance you can post up a pic of the whole dump pipe? Also, another angle on the where the wastegate feed comes off would be appreciated. Was this a decent upgrade?

Cheers
Brendan

Someone else has already expressed interest in the pipe. If this falls through I will let you know. Postage wont be huge.
As for the improvements in HP - don't expect it too much. I've never used this pipe.

Dizzy is also spoken for and going to WA and you can bargain with the new owner when he gets it.

Sorry for the off-topic MrBishi

Any idea what the part number is for a Vacuum Advance unit for the Galant (1984, ECI) might be?

This stuff is not doing much good on the floor.
make me an offer.

One last bump. Only have the AFM w/ K&N and intercooler left.
Make me an offer.