Austarion

I have had alot of offers for a number of parts, so I am now selling car off in parts. I need the garage cleared.



CAR SOLD

parts still left:

- one standard 3.55 open JA diff $100
- gearboxes: two left $200 each
- rear hatches $100
- hatch struts, re-gassed, $70 a pair

- Seats and trims interior - retrimmed front and back seats in grey vinyl with darker grey pattern cloth centres in very good conditon, no rips or tears. Rest if interior in grey. Cost me over $1,000 just to retrim. Selling the lot for $400.

Interior Pics:

http://members.optusnet.com.au/~charlies/mypic4.JPG
http://members.optusnet.com.au/~charlies/mypic5.JPG

- Simmons V4 16 x 8 and 9 with 215 and 245 Falken tyres - $1100

Simmons Pics:
http://members.optusnet.com.au/~charlies/mypic1.JPG
http://members.optusnet.com.au/~charlies/mypic3.JPG

- Simmons B45 polished 15 x 4 and 8's with rubber SOLD

- TO4 turbo with 60mm comp wheel, O-trim turbine woth .70 a/r (reco'd about 1000km's ago) with s/s oil feed line and modified return pipe, plus s/s intake piping and filter
- 38mm turbonetics deltagate external wastegate
- modified and ported stock exhaust manifold
-All three - $1700 (will not seperate) - SOLD


- bottom end SOLD
- L300 port matched -$250 - SOLD
- RX7 S4 550cc injectors -$250 - SOLD
- Head, reco and ported 5000K's old cost $1000, sell $700 - SOLD
All three for $1100
- Microtech Digi 1 PRO fuel and ignition ECU with loom tuned to suit above. $450 or $1500 with intake/injectors/head - SOLD

Heavy duty clutch kit with solid centre clutch plate done 5,000kms. Cost $700, asking $300.

- Custom polished s/s intercooler piping with blue silicon hoses (Piping, polishing and hoses cost me over $900 alone, custom PWR cooler RRP $1200).
- $300 for the piping and silicon hoses,
- $400 for damaged intercooler (doesn't leak but requires repair - about $150-200) - SOLD

- custom s/s exhaust manifold to suit to4 (not fitted) SOLD

- 2.4L 4G64B block+crank - SOLD
- Stock VR4 exhaust manifold $50





some more pics can be seen here:
http://www.angelfire.com/emo2/sydneysta ... XTIME.html

Plenty of interest, but not many buyers.

Engine just needs a cam and tune and it will make some big numbers.
Test drive in car. :D


TTT

If there is an LSD in there somewhere Charlie, I'll buy it :D

Sorry, David. No LSD's.

dag-nabit deputy dawg, when will my search end

Try the good ol' U S of A :D

pms

mate - im looking at buying an 82 ja. it drives, but has hit a stop sign. its f....ed the front bar, & apron behind it. the drivers headlight & assy are stuffed too. also need a dash shroud & a windscreen.do u have these bits & if so - how much? oh he wants $1k for it- the bodys good, silver, has electric leather recaros (scabby looking). 2 new tyres, hotwires (yuk!), out of rego but has been started weekly. it has 270k on it , turbos been rebuilt & motors ok. reckon this sounds alright 4 the money?

TTT

how much for the engine? clutch?

do you have any aircon parts foward of the connections near the battery ie compresor radiator and any other required parts.
Its too hot

Yes.

How much for the 2.1 single cam, just the motor no manifolds?

Phil

I am interested in the microtech.
Does it come with a handcontroller? Loom?
Price?
I want to run a 2.6 on efi.

i would like to know more about the simmons, are they still available ( the V4/5's ???)
please pm me.
:beer

drew