Page 1 of 1

WTB: JA Strut Bar

Posted: Tue Nov 16, 2004 9:07 am
by JJH
Don't know if they're interchangeable, but I need to replace a stuffed LH (passenger) side strut bar.
Cheers
JJH

Posted: Tue Nov 16, 2004 9:14 am
by dirty sanchez
What's a strut bar?

Posted: Tue Nov 16, 2004 9:42 am
by JJH
Refer to pic courtesy of Camotec's ubeaut CD's.

Image

Posted: Tue Nov 16, 2004 3:26 pm
by dirty sanchez
Ooooh... I thought that was called as caster rod.

Posted: Tue Nov 16, 2004 3:36 pm
by merlin
otherwise known as a radius rod

Posted: Tue Nov 16, 2004 4:03 pm
by JJH
Cool, now that we've cleared up what it's called, has anybody got one? :)

......

Posted: Tue Nov 16, 2004 5:46 pm
by bigmoz
some one hit a gutter a bit hard... didnt they just get one from a wrecker when my whele had a date with a gutter i got some parts from a wrecker i think it was called ishmals in dandy but it worked out a bit cheaper



big moz :pimp

Posted: Tue Nov 16, 2004 6:02 pm
by JJH
Thanks Moz, I'll check out some wreckers too.

Posted: Wed Nov 17, 2004 7:42 am
by MrBishi
Try checking a later sigma for compatability. They shared a lot of components and may be the same.

Posted: Wed Nov 17, 2004 8:53 am
by Alspos
And before you pull it out, measure the length of the thread hanging out beyond the mounting points. That way when you put it back together use the same measurement so you will be close to having the wheel alignment right and it won't be so hard to drive to the tyre place.

Posted: Wed Nov 17, 2004 5:02 pm
by JJH
Thanks Al, good sound advice.
Now if I can only remember how the rest of it goes back together! :D

I think this is about right????

Image

Posted: Wed Nov 17, 2004 5:36 pm
by C Fernance
It looks fine to me, but your missing the passenger side strut bar. :D

Posted: Thu Nov 18, 2004 9:03 am
by Starion VR4
Yes got 1 for you, PM me if you want it. :beer