Parts Clear Out
Posted: Mon Jun 09, 2014 7:29 pm
I've been clearing out the parent's shed and have found the following parts which I'm putting up for sale. Will be adding more parts as I find more.
Rear Hatch $50
Rear Shock with king springs $50 (on hold)
Front and Rear coilovers for Widey based on the shp struts, Front Springs are king springs 350lbs, rear are 300lbs, pics have been added. The shocks are leaking and will need to be rebuilt. $400. (on hold)
5 stud front brakes, pair of discs, the calipers and carrier, so you will just need the front hubs for 5 stud conversion for the front. $50.
Centre Console trim piece $10 (on hold)
Air Flow meter and k&n filter $20 (on hold)
Factory Intercooler $50 (on hold)
600x300 intercooler $70
Rear Discs 4 stud, Free (on hold)
Exhaust Manifold, T4 flange and provision for external wastegate. $150
TD05 from GSR-V, water cooled turbo, will bolt on to starion manifold and dump, obviously the compressor side is different. $150 (on hold)
Magnaflow performance cat, 2.5 inch, I've had it for a few years but hasn't been installed. $100
TC06 watercooled, I believe it's from a cordia $50
Alternator, unknown condition free (on hold)
Airbox with airflow meter $35 (on hold)
Optical Dizzy with Cap, for multipoint conversion $100 (on hold)
Bottom end with forged pistons, unknown condition, would prefer interested party to disassemble first to make sure they are happy with the condition of the bottom end. $400
Headlight Assembly $50 for the pair (on hold)
Clutch and flywheel, 5 puck button cushion clutch with 6 bolt flywheel. $100
Spare tyre cover free
C Pillar cover free
Interior piece $10
Centre console radio trim both are cracked free
Various Trim pieces
Side cover free
Front Guard pick up only free
Rear Hatch $50
Rear Shock with king springs $50 (on hold)
Front and Rear coilovers for Widey based on the shp struts, Front Springs are king springs 350lbs, rear are 300lbs, pics have been added. The shocks are leaking and will need to be rebuilt. $400. (on hold)
5 stud front brakes, pair of discs, the calipers and carrier, so you will just need the front hubs for 5 stud conversion for the front. $50.
Centre Console trim piece $10 (on hold)
Air Flow meter and k&n filter $20 (on hold)
Factory Intercooler $50 (on hold)
600x300 intercooler $70
Rear Discs 4 stud, Free (on hold)
Exhaust Manifold, T4 flange and provision for external wastegate. $150
TD05 from GSR-V, water cooled turbo, will bolt on to starion manifold and dump, obviously the compressor side is different. $150 (on hold)
Magnaflow performance cat, 2.5 inch, I've had it for a few years but hasn't been installed. $100
TC06 watercooled, I believe it's from a cordia $50
Alternator, unknown condition free (on hold)
Airbox with airflow meter $35 (on hold)
Optical Dizzy with Cap, for multipoint conversion $100 (on hold)
Bottom end with forged pistons, unknown condition, would prefer interested party to disassemble first to make sure they are happy with the condition of the bottom end. $400
Headlight Assembly $50 for the pair (on hold)
Clutch and flywheel, 5 puck button cushion clutch with 6 bolt flywheel. $100
Spare tyre cover free
C Pillar cover free
Interior piece $10
Centre console radio trim both are cracked free
Various Trim pieces
Side cover free
Front Guard pick up only free
