Probe SRS Forged Pistons

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
Post Reply
User avatar
1320ft
almost postwhore
Posts: 1071
Joined: Mon May 03, 2010 8:33 pm
Location: St Andrews NSW

Probe SRS Forged Pistons

Post by 1320ft »

Have 3 sets of BNIB 4G63 slugs in our warehouse we need to move


Probe Industries SRS Racing Pistons suit 4G63, priced to fly out the door, at only $330 as set inc GST!

Featuring:
◾2618-t61 Forged Aluminum.
◾Lightweight wrist pins.
◾Lightweight piston designs.
◾Full floating wrist pins.
◾Tight running clearances.
◾Narrow piston rings.
◾Low drag skirt design.
◾Large variety of compression ratios.
◾Design specific valve reliefs.

PRB-14480-.50 (1 set) 1988 - 1992
Reverse Dome, Comp Height 1.375/Bore 85.5mm/Wrist Pin Dia .827/CC -13.5c

PRB-14481-.50 (1 set) 1993 - 1999
Reverse Dome, Comp Height 1.375/Bore 85.5mm/Wrist Pin Dia .866/CC -13.5c

PRB-14481.10 (1 set) 1993 - 1999
Reverse Dome, Comp Height 1.375/Bore 86.0mm/Wrist Pin Dia .827/CC -13.5c

Image
The Forum Parts Guy

www.vibrantperformance.com for all your performance fabrication needs

IRS OUTLAW, 2.3L VR4 Powered X235 Drag Car

Here to run out of your life & take all your money!
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests