Austarion

Please use the currency calculator in my signature to get a more excact cost, as the amounts posted in AUD$ are just for refference and exchange rates vary every hour.

Parts and price update for Widebody / 5 Lug converssions.

A few things I should point out to you guys is that the 3:9 Gear ratio is NOT an LSD but a STANDARD differential out of a truck. Another thing is that the 3:9 NOR the 3:5 centres will fit inside the Narowbody differential carrier BUT it can be done, you WILL need an 87 or 88-89 LSD Housing and centre BUT you will use the 3:9 gears instead of the 3:5. So you will need to take TWO diffs appart to make ONE. Using an 3:9 diff's gears and a 3:5 Centre and housing.

NOTE:
ONLY the 86-87 model LSD's WILL swap out with NO OTHER modification, AND you can use your OLD CV's and also your old Torque tube (IF you have a Large Diff allready). Now the 87 CV's I sell ARE BIGGER around the SHAFT ( 27mm Shaft ) and that makes them more of a Heavy Duty application compared to your old CV's are aprox. 25mm shaft.

If you want to go all HEAVY DUTY then the 88-89 model LSD is for you. Its a bigger more sturdy LSD internally and it uses the larger 6 bolt CV's that have a 30mm shaft vs the 27mm from the 86-87 LSD and the 25mm of your non-LSD diff. BUT you will have to do one of thwo things to make them work on your narrowbody.
1- Convert to a 5 bolt wheels by using the 88-89 5 bolt hubs
2- Swap the 6 bolt CV's Cups for the 4 bolt CV cups, MUST use LSD CV's

If you have ANY questions please just ask me:
E-mail me at ----> ( oscardortega@yahoo.com )


3:5 or 3:9 LSD conversion Part list and pricing
- 87 OR 88-89 3:5 LSD will be US$300.00/AU$420.00

(Shipping Weight 84 pounds)
****Surface Shipping to Australia (US$150.00/AU$210.00 )
****Surface Shipping to New Zeland (US$160.00/NZ$241.00 )
**NOTE** LSD will be shipped in TWO separate boxes. Housing & Centre

- 3:9, 4:22, 4:625 Non-LSD gears to convert your LSD US$120.00/AU$170.00
If gears need to be sourced out from other States or sellers it will be actual cost and ussually more than if I already have them.

(Shipping Weight 17 pounds)
****Surface Shipping to Australia (Can be shipped WITH LSD no added $)
****Surface Shipping to New Zeland (Can be shipped WITH LSD no added $ )

- Torque Tube US$90.00 /AU$126.00
The T-Tube IS needed if you have a small Diff currently in your staz. If you have a large Diff like in the JA's please contact me for possible savings on the T-tube as you MAY be able to use yours.

(Shipping Weight 20 pounds)
****Surface Shipping to Australia ( US$25.00 /AU$35.00 )
****Surface Shipping to New Zeland (US$30.00/NZ$45.00 )

5 Lug converssion parts list and prices

- 88-89 Used 6 BOLT Half shafts SET US$120.00/AU$170.00


(Shipping Weight 24 pounds SET)
****Surface Shipping to Australia (US$35.00 /AU$50.00 set of 2)
****Surface Shipping to New Zeland (US$43.00/NZ$66.00set of 2)

- 87 Used 4 BOLT Half shafts SET US$100.00/AU$127.00


(Shipping Weight 24 pounds SET)
****Surface Shipping to Australia ( US$35.00 /AU$50.00 set of 2)
****Surface Shipping to New Zeland (US$43.00/NZ$66.00set of 2)

- 88-89 6-BOLT Rear Hubs US$110.00/AU$ (SET of 2)

(Shipping Weight 15 pounds)
****Surface Shipping to Australia ( to be determined )
****Surface Shipping to New Zeland (to be determined )

- 87 4-BOLT Rear Hubs US$110.00/AU$ (SET of 2)

(Shipping Weight 15 pounds SET)
****Surface Shipping to Australia ( to be determined )
****Surface Shipping to New Zeland (to be determined )

- Front Hubs US$90.00/AU$100.00 (SET of 2)
(Shipping Weight pounds)
****Surface Shipping to Australia ( US$25.00 /AU$36.00 set of 2)
****Surface Shipping to New Zeland (US$33.00/NZ$51.00set of 2)

**NOTE** Shipping can be LESS that stated above if I can ship more than one item at a time in the same box. Remember the weight limit is 44 pounds INCLUDING packing materials. I will also be posting aproximate weights for each item shortly so you can get a better idea.

CV Comparison list:
The lenght of the CV's never changes, the A-arms are all the same. There are however different CV's spindles/Splines, they are as follows:

82-87 Narrowbody Non-LSD, 25 mm shaft w/aprox 27.45mm Spline
86-87 LSD widebody, 27 mm shaft w/aprox. 27.45mm Spline
88-89 LSD widebody, 30 mm shaft w/aprox. 29mm Spline

SEE Pics bellow for CV's Shaft thickness comparison.




Widebody Wheels Pollished and NO damage, ALL wheels PERFECT.


- 7inch F & 8inch R Pollished to better than NEW US$450.00/AU$640.00
(Shipping Weight pounds)
****Surface Shipping to AU 20lbs ea. US$35.00ea/AU$50.00ea
****Surface Shipping to New Zeland (US$43.00/NZ$66.00ea)

- 8inch F & 9inch R Pollished to better than NEW US$650.00/AU$900.00
(Shipping Weight pounds)
****Surface Shipping to AU 22lbs ea. US$40.00ea/AU$58.00ea
****Surface Shipping to New Zeland (US$48.00/NZ$73.00ea)

I will be constanly updating the prices and shipping prices as they come available to me. Some of the smaller items CAN be shipped together and shipping can be combined to save you on shipping costs. I will post aprox weights of items, packing material and boxes so you can get an idea as well.

Thanks
Oscar

Hey Oscar,

Will we also have to pay for customs when the LSD lands, or is that all included in the price you have quoted?

Also, how much do you actually want for the LSD.

Thanks,
Alexis

Hey Oscar,

How much would it be for the 89 LSD, half shafts and rear hubs (for 5 lug conversion)?

NXTIME wrote:Hey Oscar,

How much would it be for the 89 LSD, half shafts and rear hubs (for 5 lug conversion)?

And the front hubs too, mis-matched stud patterns and wheels look

I was told 88/89 stuff wont bolt up to our cars? (could be wrong)

Whats the price on a 87' LSD

If you use the half shafts and hubs it will all bolt in. Chris, the fronts aren't a problem to have modified to a 5 lug pattern. ;)

Guys I am sorry for beeing away for a while but I am here now to adress all your questions. For some reason the e-mail notify on this post was NOT working.

Again Sorry guys...
Oscar

LxS wrote:Hey Oscar,

Will we also have to pay for customs when the LSD lands, or is that all included in the price you have quoted?

Also, how much do you actually want for the LSD.

Thanks,
Alexis

I know about the taxes on inported items BUT I was told as long I declare the contents as "USED & Damaged parts for Inspection" and have a declared value of less than US$50.00 it will be minimal. I am NOT too familiar with Australian Import laws and regulations so this is something you will have to look into on your onw. So let me know if the above will work and I can add that to the list of "To-do" things when shipping to you guys.

Guys the shipping price for the LSD is for the WHOLE thing, sealed NOT just the centres. If you guys want ONLY the centres it will weight less BUT I am not sure it will be less than 44 pounds. If its less than 44 pounds then I can ship it for CHEAP US$90.00 for surface 4 to 6 weeks or US$200.00 for Air 5 to12 days. And this is SHIPPED to your door. But I have not taken an LSD appart ever to weight the parts and if I open it up and dissassemble it I will not be able to put it together again the correct way then it will be pretty much useless as a "Bolt-On" application. So please dont ask me to tare it appart just to check the weight. Sorry. BUT I will try to find out about this option.

Widebody Wheels Pollished and NO damage, ALL wheels PERFECT.
- 7inch F & 8inch R Pollished to better than NEW US$450.00/AU$640.00
- 8inch F & 9inch R Pollished to better than NEW US$650.00/AU$900.00

LINK bellow is to pics of the 8's and 9's and the 7's and 8's. The ones pollished on the BACK are the 8's and 9's NOTE: If you wnat them pollished on the BACK like the pics thats US$25.00 MORE per each wheel ADDITIONAL. Otherwise pollish ONLY the front.

http://f1.pg.photos.yahoo.com/ph/oscard ... /my_photos

If you guys want to figure out estimated shipping on your own visit the US post Office site at http://ircalc.usps.gov/weight.asp?Contents=1 This is the INTERNATIONAL Calculator so you must enter YOUR country AU in the shipping to area as it will calculate from the US automatically.


Hope I have addressed all of your questions.
Any other questions just ask !
You can e-mail me at ( oscardortega@yahoo.com )

Thanks
Oscar

ohhhh....that is soooooo tempting..... :drool:
would the 89 LSD fit a JA (83) starion?

so for an LSD, 5 lugs parts and wheels it would be $1460AU?

*runs out to buy a lotto ticket*

Dont forget POST / Shipping !

Oscar

Is it likely you'll be offering this sort of stuff for more than a year?

Ill start saving now :D.

I dont see why not...
It will always matter on wether or NOT the parts are available to me.

I am trying to find out if I can get new /Rebuilt Half shafts as one set that I have are due for a rebuilt, they still work fine but will rather NOT sell those as I dont like things comming back to me as I sold a bad or worthless part to any of you. I am trying to build a reputation and thats NOT the way to do it.

If the part is NOT in good condition I rather NOT sell it.

The Wheels are the only ones I think will only go up in price as the wider ones 8's and 9's are getting very rare to impossible to find even here in the US. A BAD set, non-pollished and damage to the lip set of 8's and 9's sells here in the us for as much as US$400.00 then ADD pollishing and repair and you got your new price.

Oscar

I respect that. Just what you are selling ties in perfectly to my plans :) Widebody wheels on a narroybody make me swoon.

Update on parts needed for the LSD Converssion...

The carrier  in the 88/89 is BIGGER than the one from the 87 , the  87 is a 4 bolt axle. The  87 down should  fit in the  proper houseing , as has been point'd out the  houseing is longer for an lsd rear , so the tourqe tubes are shorter to  make up for this,, so this means , no, the  non lsd  houseing will not work  with an lsd  carrier ,so your gona  need to have the houseing  and carrier  from an lsd rear  along  with the tourqe tube to match  an lsd rear  
 
So you guys will NEED to also get the Torque Tube ( Tube Between the LSD and the Axel ). I'll have to price those for you guys. Shipping the smaller stuff is NOT a big deal and can be rather cheap compared to the LSD. BUT I am still looking into alternate shipping means.

Oscar

All info has been moved to the FIRST post on top
thanks

can you tell me how mutch 7 & 8" wheels weigh that is a set of two 7" front wheels and two 8" rear wheels and maybe the shiping to Iceland?