Austarion

As title says, the little block that mounts to firewall. And shipping to UK.

Ta!

No one?

If you want you can install a Willwood adjustable bias valve.

popup, can you post a pic of what you need so we know what to look for.
panda

It's pissing down with rain at the moment but pretty sure it looks like this. Its on the pipe from the brake master cylinder towards the rear brakes.

http://www.ebay.co.uk/itm/PAJERO-BRAKE- ... 2c6be39c4d

OLD FART wrote:If you want you can install a Willwood adjustable bias valve.

I have thought about that, but the cheap ones (about 60 AUD) I have read can be prone to leaking/breaking. Wilwood etc are like 90AUD and I don't really need adjustable. I reckon Mitsubishi one would be most reliable.

popup wrote:

OLD FART wrote:If you want you can install a Willwood adjustable bias valve.

I have thought about that, but the cheap ones (about 60 AUD) I have read can be prone to leaking/breaking. Wilwood etc are like 90AUD and I don't really need adjustable. I reckon Mitsubishi one would be most reliable.

Have had my W/wood bias adjuster on for 3+ years and no problems at all.
IMHO it is definitely needed IF you do a front brake upgrade.

OLD FART wrote:

popup wrote:

OLD FART wrote:If you want you can install a Willwood adjustable bias valve.

I have thought about that, but the cheap ones (about 60 AUD) I have read can be prone to leaking/breaking. Wilwood etc are like 90AUD and I don't really need adjustable. I reckon Mitsubishi one would be most reliable.

Have had my W/wood bias adjuster on for 3+ years and no problems at all.
IMHO it is definitely needed IF you do a front brake upgrade.

I didnt use one when I put the 4 poters on the front of mine...

I think Ive got a factory one out of a early non ABS starion laying around if you want it.

i have one if your still keen

click here
http://forums.austarion.com/viewtopic.p ... 689#159689