Wanted: Non-ABS Brake Bias Valve

popup · Post by **popup** » Fri Mar 15, 2013 7:50 pm

As title says, the little block that mounts to firewall. And shipping to UK.

Ta!

popup · Post by **popup** » Wed Mar 20, 2013 11:06 pm

No one?

OLD FART · Post by **OLD FART** » Thu Mar 21, 2013 4:22 am

If you want you can install a Willwood adjustable bias valve.

panda · Post by **panda** » Thu Mar 21, 2013 9:33 pm

popup, can you post a pic of what you need so we know what to look for.
panda

popup · Post by **popup** » Fri Mar 22, 2013 7:17 am

It's pissing down with rain at the moment but pretty sure it looks like this. Its on the pipe from the brake master cylinder towards the rear brakes.

http://www.ebay.co.uk/itm/PAJERO-BRAKE- ... 2c6be39c4d

popup · Post by **popup** » Wed Mar 27, 2013 7:55 am

OLD FART wrote:If you want you can install a Willwood adjustable bias valve.

I have thought about that, but the cheap ones (about 60 AUD) I have read can be prone to leaking/breaking. Wilwood etc are like 90AUD and I don't really need adjustable. I reckon Mitsubishi one would be most reliable.

OLD FART · Post by **OLD FART** » Wed Mar 27, 2013 4:17 pm

popup wrote:
OLD FART wrote:If you want you can install a Willwood adjustable bias valve.
I have thought about that, but the cheap ones (about 60 AUD) I have read can be prone to leaking/breaking. Wilwood etc are like 90AUD and I don't really need adjustable. I reckon Mitsubishi one would be most reliable.

Have had my W/wood bias adjuster on for 3+ years and no problems at all.
IMHO it is definitely needed IF you do a front brake upgrade.

JAS · Post by **JAS** » Thu Mar 28, 2013 7:05 am

OLD FART wrote:
popup wrote:
OLD FART wrote:If you want you can install a Willwood adjustable bias valve.
I have thought about that, but the cheap ones (about 60 AUD) I have read can be prone to leaking/breaking. Wilwood etc are like 90AUD and I don't really need adjustable. I reckon Mitsubishi one would be most reliable.
Have had my W/wood bias adjuster on for 3+ years and no problems at all.
IMHO it is definitely needed IF you do a front brake upgrade.

I didnt use one when I put the 4 poters on the front of mine...

I think Ive got a factory one out of a early non ABS starion laying around if you want it.

bigmoz · Post by **bigmoz** » Sat Apr 13, 2013 9:30 pm

i have one if your still keen

click here
http://forums.austarion.com/viewtopic.p ... 689#159689

Austarion

Wanted: Non-ABS Brake Bias Valve

Wanted: Non-ABS Brake Bias Valve

Who is online