Austarion

(1) 4g63 VR4 block , 4G64 crank ( machined, nitrided) 2.3 litre. Wiseco forged pistons, I beam rods, ACL race pistons. Oil squirters, Fully balanced. Block still in plastic from Orger Performance engines who machined, assembled and balanced engine. $2000

(2) Brand new TDO6 20g. Still in box, genuine Mitsubishi not Chinese $700

(3) Brand new oil pump , in box $100

(4) Brand new lightweight solid racing front pulley $80

(5) Brand new water pump ($50)

(6) VR4 turbo cams ($75)

(7) Big 16G housing and wheel , brand new ($100)

(8) VR4 engine, all accessories, ready to run. EVO Big 16G , $1000

(9) Microtech MT8 ECU programmed for 4g63 $350

Lots more stuff as well, turbo sump, front pulleys etc

Wayne 0457830257

will all be up on ebay soon

PMd for the oil pump :)

got an exhaust/ dump to suit the td05? might be interested in the sump too
can you pm me your number so i can give you a call

morris

ph no in post

What CR and diameter pistons are in it?

I assume you say 2.4l because of the over-size pistons? With stock bores, a 4G63 with 4G64 crank = 2.3l

Cheers.

Lummy wrote:What CR and diameter pistons are in it?

I assume you say 2.4l because of the over-size pistons? With stock bores, a 4G63 with 4G64 crank = 2.3l

Cheers.

Beat me to it :) 2269.3 cc actually :D

Yes you are correct. 85.5 bore. I calculated the CR but the calcs are at home and I am currently away on business. I recall it was about 9.0:1
Can provide exact numbers if you are interested.

is the engine still forsale? its a narrow fwd block im assuming?

JA83 wrote:is the engine still forsale? its a narrow fwd block im assuming?

Yes

That td06 is tempting..