twin cam head
Posted: Mon Jul 02, 2012 6:51 pm
Have a big port head for sale(VR4). Bought it to swap my head as it was supposed to fit, but I have an evo head with the smaller ports, so manifold no go.
Was rebuilt before i purchased it and has not been installed. previous owner had it sitting in the shed without being wrapped so the cams have some what looks like slight surface rust, but comes off with a little degreaser and a rag, so maybe just crap in the air.
will need to have face machined again as there are couple of scratches on it, but have been assured by mechanic that it all looks fine to go straight on after machining.
$250
Was rebuilt before i purchased it and has not been installed. previous owner had it sitting in the shed without being wrapped so the cams have some what looks like slight surface rust, but comes off with a little degreaser and a rag, so maybe just crap in the air.
will need to have face machined again as there are couple of scratches on it, but have been assured by mechanic that it all looks fine to go straight on after machining.
$250