Page 1 of 3
Starion stuff for sale! amazingly :) *Updated*
Posted: Sun May 27, 2012 7:44 pm
by silo
Hello Peeps.
I am begining to pull out all my starion stuff and list it on ebay!
Over the coming weeks i will add as much stuff as possible.
Please feel free to throw me any serious offers for any parts listed.
This stuff needs to be put to use instead of sitting in my shed
All new items will appear in this topic.
Cheers all,
Silo
Posted: Sun May 27, 2012 7:47 pm
by silo
Posted: Sun May 27, 2012 7:49 pm
by silo
Clear timing belt cover
sold
Posted: Sun May 27, 2012 11:37 pm
by redzone
I'm so bummed I didn't find out about the meister's until after the auctions finished :(
Posted: Tue May 29, 2012 6:39 pm
by bridgey
would you send manifold to nz?
Posted: Tue May 29, 2012 7:33 pm
by TOMSUN
What other parts you selling?
Posted: Wed May 30, 2012 3:10 pm
by silo
bridgey wrote:would you send manifold to nz?
Sure, why not!
TOMSUN wrote:What other parts you selling?
*Two rust free doors with very rare manual winders(couple of dents)-sold
*Newly rebuilt DOHC engine. Forgies, Starion block, VR4 rods etc etc
*Starion gearbox
*Td05 16g from Evo6
*Trust Tdo5 (old style)
*New 38mm tial wastegate
*Rebuilt rear subframe and control arms with noltec bushes
*Rear coilovers
*Rack and Pinion setup
*2x NEW 18x9 Meisters with New tyres
*2X New omp rs race seats
*1 set of bolt on fiberglass flares-sold
*Full set of Evo6 Brembo's. fronts on S5 rx7 hubs/spindles
Probably some other bits arround too.
Cheers
Posted: Wed May 30, 2012 5:56 pm
by bridgey
any chance you can find out what its worth to ship? I can imagine I might need to save a little lol
Posted: Wed May 30, 2012 6:55 pm
by ProZac
Would totally buy the rack and pinion setup if it was over this side of the ditch, yours looks like the best way Ive seen to do it so far, and what I'll be basing my work off.
Posted: Wed May 30, 2012 7:40 pm
by GormzZ
prices for gearbox and fibreglass flares?
Posted: Wed May 30, 2012 10:06 pm
by silo
GormzZ wrote:prices for gearbox and fibreglass flares?
I will probabaly Start the gearbox for about $300, and the flares for $100 but am open to sensible offers at this stage.
Silo
Posted: Wed May 30, 2012 11:28 pm
by NXTIME
Post up prices please :)
Posted: Wed May 30, 2012 11:30 pm
by NXTIME
Prozac, I am going to Christchurch at the end of July...might be able to bring it over for you
Posted: Thu May 31, 2012 10:46 am
by GormzZ
silo wrote:GormzZ wrote:prices for gearbox and fibreglass flares?
I will probabaly Start the gearbox for about $300, and the flares for $100 but am open to sensible offers at this stage.
Silo
if i could get some pictures also, would be nice? what cond is the gearbox in?
Posted: Thu May 31, 2012 3:36 pm
by ProZac
NXTime - Interesting! Its a complete crossmember though, might be a bit big?
You should swing by and say hi anyway :)
