Page 1 of 2
VR4 engine and W58 gearbox $3500
Posted: Sun Apr 22, 2012 9:30 pm
by Superscan
Item: WILL NOT SEPARATE so please DON'T ASK.
1. Bare VR4 Engine 4G63 twincam (requires a rebuild IMHO).
2. Fully reconditioned W58 gearbox (never run after reco)
3. Bill Hincher bellhousing to be able to bolt the VR4 block directly to the W58 gearbox (no clutch or throwout fork).
4. New Forged H-Beam rods with ARP 2000 rod bolts.
5. Custom RWD turbo exhaust manifold.
6. New head refurb kit containing:
a. 1mm O/S Stainless valves.
b. Bronze valve guides.
c. Gen-3 lifters
7. Various other miscellaneous parts that came with the engine when I bought it.
Location: Sydney
Item Condition: As stated above
Pictures:
Price: $3500
Postage: Pickup or you organise transport (willing drop at a local depot)
Contact Details: PM
Currently have too many projects so a cull is in order. :(
Cheers.
Posted: Mon Apr 23, 2012 12:22 pm
by iXNAY
i know you have clearly stated your not parting it out but if it comes to the point where you do part it out ill take dibs on the exhaust manifold
Posted: Mon Apr 23, 2012 2:31 pm
by TOMSUN
Where's shannon??? :D
Posted: Mon Apr 23, 2012 3:37 pm
by NXTIME
Shannon has probably already called him :D
I may also be interested in gearbox plus Bill's adapter if it comes down to parting.
Posted: Mon Apr 23, 2012 8:09 pm
by 1320ft
TOMSUN wrote:Where's shannon??? :D
His head exploded when he saw this thread. Thinking what to do, what to do!
Posted: Mon Apr 23, 2012 8:14 pm
by iXNAY
1320ft wrote:TOMSUN wrote:Where's shannon??? :D
His head exploded when he saw this thread. Thinking what to do, what to do!
funny thing is I don't think Shannon actually needs any of this stuff.
Posted: Mon Apr 23, 2012 9:01 pm
by Superscan
Wanting to sell it as a job lot because if any parts are left here, I'll be tempted to buy another...
Pics of the other stuff.
VR4 ECU and wiring harness.
RWD modded inlet manifold (top half only)
Standard Bluetop injectors (400cc I think)
CAS
Standard turbo exhaust manifold
Throttlebody
Coil pack
VR4 clutch and pressureplate
Will also throw in a new engine gasket kit.
Cheers.
Posted: Tue Apr 24, 2012 11:55 pm
by Superscan
No Interest :(
Oh well, bidding on a set of forged Wiseco pistons and an engine bearing kit for this engine.
That would make it approx. $4000 if anyone is interested.
Cheers.
Posted: Wed Apr 25, 2012 10:51 am
by www.18u
funny thing is I don't think Shannon actually needs any of this stuff.
You're right Pete! I already have all of it.
I figured it was time to let someone else have a chance at buying something on here rofl
Still... I'm resisting the urge
Posted: Wed Apr 25, 2012 10:30 pm
by WidebodyWoody
The box and bellhousing is so tempting, but I don't want the rest and its a little out of my build budget.
Posted: Tue May 01, 2012 10:07 pm
by Superscan
Well I won the Wiseco pistons (86.5mm)
Will be posting the package on Ebay at the end of the week.
EDIT:
Took a picture of the bores (standard 85mm) and they are in good condition.
Cheers.
Cheers.
Posted: Sun May 27, 2012 12:03 am
by Superscan
Now For Sale on
Ebay
Will do a better price for Austarion members if you contact me first.
Cheers.
Posted: Fri Jun 22, 2012 6:53 pm
by Superscan
..SOLD..
Cheers.
Posted: Mon Jun 25, 2012 12:46 pm
by thrash
someone on the forums? Shannon perhaps?
Posted: Mon Jun 25, 2012 2:01 pm
by www.18u
Not me thrash! One twincam is enough.. Besides I'm selling up most of my stuff as I bought another car.