Page 1 of 1
WTB: P/S pump and power window motor
Posted: Wed Jun 23, 2004 5:05 pm
by hcca
Wanted power steering pump (non-leaking variety) and driver's side power window motor (non-not working variety) :).
power steering
Posted: Thu Jun 24, 2004 10:14 am
by Starion VR4
Yea got both, PM Ya :beer
Posted: Thu Jun 24, 2004 12:12 pm
by MrBishi
You could always have a bash at rebuilding the pump you have.
Posted: Thu Jun 24, 2004 4:55 pm
by hcca
I thought about that, but the seal kit isn't cheap, plus you need a press.
Posted: Thu Jun 24, 2004 5:10 pm
by Alspos
No you don't , not to do just the seals. It's probably just the one on the front.
Posted: Thu Jun 24, 2004 5:30 pm
by hcca
Hmm.. Fulcrum reckoned you did need a press. Yeah, it is the seal on the front.
Posted: Fri Jun 25, 2004 8:27 am
by Alspos
I pulled one I have apart to redo the thread on the shaft. Take the bolts out of the back, take the cover off carefully, there's a circlip you have to get off and make sure you notice which way the little impeller blades go. They will fall out and move around everywhere. Once you have all that crap out flip the pump and hit the shaft softly with a hammer. It should all drop out and give you access to the front seal.
I have a pdf of it if you don't. It's not that hard to pull apart, just be careful.