Page 1 of 2
Large LSD
Posted: Fri Sep 23, 2011 10:05 pm
by silo
Hey guys,
Have for sale a large 4-bolt lsd center that i imported for my car but now don't need it :roll:
$400+postage :beer
Silas
Posted: Sat Sep 24, 2011 12:00 pm
by dirtygalant
fark that's cheap for what it is. Does it come with crown wheel and pinion by any chance?
Posted: Sat Sep 24, 2011 1:52 pm
by OLD FART
EM'd
Posted: Sat Sep 24, 2011 3:35 pm
by silo
dirtygalant wrote:fark that's cheap for what it is. Does it come with crown wheel and pinion by any chance?
Crown wheel but no pinion sorry!
Oldie my E-mail has changed will PM you the new one!
Cheers,
Silas
Posted: Sun Sep 25, 2011 9:40 pm
by JDSTAZ45
dirtygalant wrote:fark that's cheap for what it is.
Well priced if you need it as a spare centre, but you would be paying top dollar as a complete diff! The Large housing on this LSD is as rare as rocking horse poop in Oz.
You would need to get the remainder of the diff from the US...
Posted: Sun Sep 25, 2011 10:56 pm
by dirtygalant
yeah I have two diffs on the way from the US. If this uses the smaller 4-bolt axles as opposed to the large 6-bolt axles then the LSD center will go into a JB/JD 'big' diff.
Posted: Sun Oct 02, 2011 5:47 pm
by silo
Can someone please tell me why i still have this
Silo
Posted: Sun Oct 02, 2011 6:26 pm
by OLD FART
Will it suit the Aussie delivered axles?
Posted: Sun Oct 02, 2011 7:03 pm
by silo
OLD FART wrote:Will it suit the Aussie delivered axles?
As far as i know 4 bolt yes, 6 bolt no! But am willing to be corrected by a higher authority :beer
Silas
Re LSD
Posted: Mon Oct 03, 2011 3:04 pm
by starionc
Can you measure the crown wheel and let us know please?
I was sold a "large" LSD The complete diff! but it is the same size as the spare open diff that I have?? So I either fluked 2 large diffs or I was had? Not that I care, the LSD is all I really needed :pimp
A spare would be handy......... not that I have ever broken one :roll:
Cheers Jason
Re: Re LSD
Posted: Mon Oct 03, 2011 7:29 pm
by silo
starionc wrote:Can you measure the crown wheel and let us know please?
I was sold a "large" LSD The complete diff! but it is the same size as the spare open diff that I have?? So I either fluked 2 large diffs or I was had? Not that I care, the LSD is all I really needed :pimp
A spare would be handy......... not that I have ever broken one :roll:
Cheers Jason
Well it wouldn't fit in the JA housing that i have, not even close!
But i will measure the crown anyway :beer
Silas
Re: Re LSD
Posted: Tue Oct 04, 2011 4:47 am
by OLD FART
silo wrote:starionc wrote:Can you measure the crown wheel and let us know please?
I was sold a "large" LSD The complete diff! but it is the same size as the spare open diff that I have?? So I either fluked 2 large diffs or I was had? Not that I care, the LSD is all I really needed :pimp
A spare would be handy......... not that I have ever broken one :roll:
Cheers Jason
Well it wouldn't fit in the JA housing that i have, not even close!
But i will measure the crown anyway :beer
Silas
Silas while you are doing that can you count the number of teeth as well so we will know if it is a 35 or 39 ?
Posted: Tue Oct 04, 2011 7:44 am
by Lummy
From memory, the large LSD has a 200mm crown wheel and the small has a 180mm one.
But it has been a while since I measured them and there's been a few beers go down-range since then.
Posted: Wed Oct 05, 2011 9:23 am
by silo
Lummy wrote:From memory, the large LSD has a 200mm crown wheel and the small has a 180mm one.
But it has been a while since I measured them and there's been a few beers go down-range since then.
Spot on, just checked the crown and is 200mm 39tooth!
Cheers,
Silas
Re: Re LSD
Posted: Thu Oct 06, 2011 10:33 am
by starionc
OLD FART wrote:silo wrote:starionc wrote:Can you measure the crown wheel and let us know please?
I was sold a "large" LSD The complete diff! but it is the same size as the spare open diff that I have?? So I either fluked 2 large diffs or I was had? Not that I care, the LSD is all I really needed :pimp
A spare would be handy......... not that I have ever broken one :roll:
Cheers Jason
Well it wouldn't fit in the JA housing that i have, not even close!
But i will measure the crown anyway :beer
Silas
Silas while you are doing that can you count the number of teeth as well so we will know if it is a 35 or 39 ?
By 200mm is that the front edge with the teeth? As I just measured the one I have spare, It's 200mm on the teeth/ gear side and 180mm on the back!!?? Sorry to confuse the issue.
Also my one has 39 teeth as well, does this make it a 3.5? or 3.9? I have the matching pinion gear!!
Cheers Jason