Large LSD

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
User avatar
silo
Enthusiast
Posts: 533
Joined: Fri Oct 21, 2005 2:21 pm
Location: Goulburn,NSW

Large LSD

Post by silo »

Hey guys,

Have for sale a large 4-bolt lsd center that i imported for my car but now don't need it :roll:

Image

$400+postage :beer

Silas
Last edited by silo on Sat Sep 24, 2011 8:27 pm, edited 1 time in total.
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

fark that's cheap for what it is. Does it come with crown wheel and pinion by any chance?
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

EM'd
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
User avatar
silo
Enthusiast
Posts: 533
Joined: Fri Oct 21, 2005 2:21 pm
Location: Goulburn,NSW

Post by silo »

dirtygalant wrote:fark that's cheap for what it is. Does it come with crown wheel and pinion by any chance?
Crown wheel but no pinion sorry!

Oldie my E-mail has changed will PM you the new one!

Cheers,
Silas
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

dirtygalant wrote:fark that's cheap for what it is.
Well priced if you need it as a spare centre, but you would be paying top dollar as a complete diff! The Large housing on this LSD is as rare as rocking horse poop in Oz.
You would need to get the remainder of the diff from the US...
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

yeah I have two diffs on the way from the US. If this uses the smaller 4-bolt axles as opposed to the large 6-bolt axles then the LSD center will go into a JB/JD 'big' diff.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
User avatar
silo
Enthusiast
Posts: 533
Joined: Fri Oct 21, 2005 2:21 pm
Location: Goulburn,NSW

Post by silo »

Can someone please tell me why i still have this :wtf:

Silo
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

Will it suit the Aussie delivered axles?
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
User avatar
silo
Enthusiast
Posts: 533
Joined: Fri Oct 21, 2005 2:21 pm
Location: Goulburn,NSW

Post by silo »

OLD FART wrote:Will it suit the Aussie delivered axles?


As far as i know 4 bolt yes, 6 bolt no! But am willing to be corrected by a higher authority :beer

Silas
starionc
I love starions
Posts: 479
Joined: Wed Sep 14, 2005 11:50 am
Location: sydney
Contact:

Re LSD

Post by starionc »

Can you measure the crown wheel and let us know please?

I was sold a "large" LSD The complete diff! but it is the same size as the spare open diff that I have?? So I either fluked 2 large diffs or I was had? Not that I care, the LSD is all I really needed :pimp
A spare would be handy......... not that I have ever broken one :roll:

Cheers Jason
How many Starions can one man drive!!

Check out my website: www.aboutstumpgrinding.com.au
User avatar
silo
Enthusiast
Posts: 533
Joined: Fri Oct 21, 2005 2:21 pm
Location: Goulburn,NSW

Re: Re LSD

Post by silo »

starionc wrote:Can you measure the crown wheel and let us know please?

I was sold a "large" LSD The complete diff! but it is the same size as the spare open diff that I have?? So I either fluked 2 large diffs or I was had? Not that I care, the LSD is all I really needed :pimp
A spare would be handy......... not that I have ever broken one :roll:

Cheers Jason
Well it wouldn't fit in the JA housing that i have, not even close!

But i will measure the crown anyway :beer
Silas
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Re: Re LSD

Post by OLD FART »

silo wrote:
starionc wrote:Can you measure the crown wheel and let us know please?

I was sold a "large" LSD The complete diff! but it is the same size as the spare open diff that I have?? So I either fluked 2 large diffs or I was had? Not that I care, the LSD is all I really needed :pimp
A spare would be handy......... not that I have ever broken one :roll:

Cheers Jason
Well it wouldn't fit in the JA housing that i have, not even close!

But i will measure the crown anyway :beer
Silas
Silas while you are doing that can you count the number of teeth as well so we will know if it is a 35 or 39 ?
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
Lummy
I love starions
Posts: 494
Joined: Sat Jun 07, 2008 9:58 am
Location: Victoria

Post by Lummy »

From memory, the large LSD has a 200mm crown wheel and the small has a 180mm one.

But it has been a while since I measured them and there's been a few beers go down-range since then.
User avatar
silo
Enthusiast
Posts: 533
Joined: Fri Oct 21, 2005 2:21 pm
Location: Goulburn,NSW

Post by silo »

Lummy wrote:From memory, the large LSD has a 200mm crown wheel and the small has a 180mm one.

But it has been a while since I measured them and there's been a few beers go down-range since then.
Spot on, just checked the crown and is 200mm 39tooth!

Cheers,
Silas
starionc
I love starions
Posts: 479
Joined: Wed Sep 14, 2005 11:50 am
Location: sydney
Contact:

Re: Re LSD

Post by starionc »

OLD FART wrote:
silo wrote:
starionc wrote:Can you measure the crown wheel and let us know please?

I was sold a "large" LSD The complete diff! but it is the same size as the spare open diff that I have?? So I either fluked 2 large diffs or I was had? Not that I care, the LSD is all I really needed :pimp
A spare would be handy......... not that I have ever broken one :roll:

Cheers Jason
Well it wouldn't fit in the JA housing that i have, not even close!

But i will measure the crown anyway :beer
Silas
Silas while you are doing that can you count the number of teeth as well so we will know if it is a 35 or 39 ?
By 200mm is that the front edge with the teeth? As I just measured the one I have spare, It's 200mm on the teeth/ gear side and 180mm on the back!!?? Sorry to confuse the issue.
Also my one has 39 teeth as well, does this make it a 3.5? or 3.9? I have the matching pinion gear!!

Cheers Jason
How many Starions can one man drive!!

Check out my website: www.aboutstumpgrinding.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests