WTB: Gearbox for research/rebuild.

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
Post Reply
Superscan
Big Dorifto
Posts: 76
Joined: Sat Jul 29, 2006 12:30 pm
Location: Sydney

WTB: Gearbox for research/rebuild.

Post by Superscan »

Looking at doing a narrow-block 5 speed gearbox (Scorpion 2.0L) with the Starion internals for one of my Twincam 4G63 projects.

It's going to be a N/A engine but with a bit more power, aiming for 130kw ATW).

Can't be bothered doing a block swap, and since I have a RVR head with the CAS on the front of the engine, I won't have to "massage" anything either.

A narrow block gearbox with Starion internals will be perfect, light and relatively strong.

Cheers.
Top
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

completely unrelated, but would you mind posting some pics of the rvr head? Is the top cam gear cover the same as the standard head?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
Top
Superscan
Big Dorifto
Posts: 76
Joined: Sat Jul 29, 2006 12:30 pm
Location: Sydney

Post by Superscan »

thrash wrote:completely unrelated, but would you mind posting some pics of the rvr head? Is the top cam gear cover the same as the standard head?
It's the same as the VR4 and HH/HG GSR heads.
The CAS is bolted on behind the inlet cam gear with an inductive pickup.

Not a great picture but the VR4 head is on the left and the RVR is on the right.

Image

I'll take a few pics tomorrow.

Cheers.
Top
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

Sorry Scott, I have been dragging my feet on the gearbox replacement on the GSR-V. I wanted to sort out the power steering first but no success on 2nd hand parts!

I have the spare gearbox for you and will be happy to drop off some time next week. Hopefully I can grab a reconditioned one from you when I am ready! :beer

Also, can you comment on these KM132 gearbox rebuild kits from the States. There are 3 types...the dearer one is for 88-89 widey box.

1. http://www.ebay.com.au/itm/390282267458 ... 1423.l2649
2. http://www.ebay.com.au/itm/370477084936 ... 1423.l2649
3. http://www.ebay.com.au/itm/390282273324 ... 1423.l2649

:beer
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
Top
Superscan
Big Dorifto
Posts: 76
Joined: Sat Jul 29, 2006 12:30 pm
Location: Sydney

Post by Superscan »

JDSTAZ45 wrote:Sorry Scott, I have been dragging my feet on the gearbox replacement on the GSR-V. I wanted to sort out the power steering first but no success on 2nd hand parts!
Not a problem. Figured you were busy getting other stuff done. :)
JDSTAZ45 wrote:I have the spare gearbox for you and will be happy to drop off some time next week. Hopefully I can grab a reconditioned one from you when I am ready! :beer
Any time is fine, just give me a call before you head over.
JDSTAZ45 wrote:Also, can you comment on these KM132 gearbox rebuild kits from the States. There are 3 types...the dearer one is for 88-89 widey box.

1. http://www.ebay.com.au/itm/390282267458 ... 1423.l2649
2. http://www.ebay.com.au/itm/370477084936 ... 1423.l2649
3. http://www.ebay.com.au/itm/390282273324 ... 1423.l2649

:beer
The MMC Transmission manual I have doesn't show any differences between 1 and 2.
No.: 3. is definitely the KM132-M.

There were several upgrades to the KM132-M
Reverse syncro.
Flanged rather than snap ringed bearings.
5th gear and spacer were made into 1 piece along with a few other minor mods.

BTW: the aluminium pan wasn't for gearbox strength, it was because the pressed metal plates were being damaged due to people jacking up the gearbox on it.

Cheers.
Top
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:
Contact enthuzed

Post by enthuzed »

thrash wrote:completely unrelated, but would you mind posting some pics of the rvr head? Is the top cam gear cover the same as the standard head?
I remember looking at this myself.
This will help thrash & there's a reasonable pic half way down:
http://forums.austarion.com/viewtopic.php?t=12943
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Top
JJH
Enthusiast
Posts: 651
Joined: Mon Oct 18, 2004 10:09 am
Location: Melbourne - East

Post by JJH »

Superscan wrote:
JDSTAZ45 wrote:Also, can you comment on these KM132 gearbox rebuild kits from the States. There are 3 types...the dearer one is for 88-89 widey box.

1. http://www.ebay.com.au/itm/390282267458 ... 1423.l2649
2. http://www.ebay.com.au/itm/370477084936 ... 1423.l2649
3. http://www.ebay.com.au/itm/390282273324 ... 1423.l2649

:beer
The MMC Transmission manual I have doesn't show any differences between 1 and 2.
No.: 3. is definitely the KM132-M.

There were several upgrades to the KM132-M
Reverse syncro.
Flanged rather than snap ringed bearings.
5th gear and spacer were made into 1 piece along with a few other minor mods.
So which kit should/can we use for our Starion boxes?
Thanks
Top
JJH
Enthusiast
Posts: 651
Joined: Mon Oct 18, 2004 10:09 am
Location: Melbourne - East

Post by JJH »

Superscan wrote:
JDSTAZ45 wrote:Also, can you comment on these KM132 gearbox rebuild kits from the States. There are 3 types...the dearer one is for 88-89 widey box.

1. http://www.ebay.com.au/itm/390282267458 ... 1423.l2649
2. http://www.ebay.com.au/itm/370477084936 ... 1423.l2649
3. http://www.ebay.com.au/itm/390282273324 ... 1423.l2649

:beer
The MMC Transmission manual I have doesn't show any differences between 1 and 2.
No.: 3. is definitely the KM132-M.

There were several upgrades to the KM132-M
Reverse syncro.
Flanged rather than snap ringed bearings.
5th gear and spacer were made into 1 piece along with a few other minor mods.
So which kit should/can we use for our Starion boxes?
Thanks
Top
User avatar
1320ft
almost postwhore
Posts: 1071
Joined: Mon May 03, 2010 8:33 pm
Location: St Andrews NSW

Post by 1320ft »

I'll tell you tomorrow
The Forum Parts Guy

www.vibrantperformance.com for all your performance fabrication needs

IRS OUTLAW, 2.3L VR4 Powered X235 Drag Car

Here to run out of your life & take all your money!
Top
Post Reply

Return to “Buy / Sell”

Who is online

Users browsing this forum: No registered users and 42 guests